A50
Loose
Taped
MKT Series
MꢀTAllIZꢀD POlꢄꢀSTꢀR FIlM CAPACITOR
D.C. MꢃlTIPꢃRPOSꢀ APPlICATIONS
Typicaꢁ appꢁications: blocking, coupling, decoupling, by-
passing, interference suppression in low voltage applications
(i.e.:AUTꢁMꢁTIVꢀ).
PRꢁDUCT CꢁDꢀ: A50
D max
Ød ±0.05
<7
≥7<16
≥16
0.6
0.8
1
All dimensions are in mm.
gꢀNꢀRAl TꢀChNICAl DATA
PRODꢃCT CODꢀ SꢄSTꢀM
Dieꢁectric: polyester film (polyethylene terephthalate).
The part number, comprising 14 digits, is formed as follows:
Pꢁates:
aluminium layer deposited by evaporation under
vacuum.
1
2
3
4
5
6
7
8
9
10 11 12 13 14
Windinꢂ: non-inductive type.
leads: tinned wire.
-
A 5 0
Protection: polyester tape wrapping and thermosetting resin
Digit 1 to 3
Digit 4
Series code.
d.c. rated voltage:
C = 50V D = 63V ꢀ= 100V
end fill.
Markinꢂ:
Manufacturer’s logo, series (1.50), dielectric
code (MKT), capacitance, tolerance, D.C. rated
voltage.
I = 250V
M =400V P =630V Q=1000V
Cꢁimatic cateꢂory: 55/105/56 IꢀC 60068-1
Operatinꢂ temperature ranꢂe: -55 to +105°C
Reꢁated documents: IꢀC 60384-2
Digit 5
Length (mm):
F=11; H=14; K=20.5; Q=28; T=33
Digits 7 - 8 - 9 indicate the first three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 6 to 9
Digit 10 to 11 Mechanical version and/or packaging (table1)
Digit 12
Identifies the dimensions and electrical
characteristics.
Digit 13
Digit 14
Internal use
Capacitance tolerance:
J=5%; K=10%; M=20%.
Windinꢂ scꢅeme
Table 1 (for more detailed information, please refer to page 14).
Orderinꢂ code
Standard
packaꢂinꢂ styꢁe
single sided metallized
polyester film
(Digit 10 to 11)
26
Reel Ø 355 mm
Loose
AA
Rated
Cap.
63Vdc/40Vac
Max
dv/dt
Max K0
Part Number
Rated
Cap.
50Vdc/30Vac
Max
dv/dt
Max K0
Part Number
(V2/µs)
0.50 ꢀ3
0.50 ꢀ3
0.50 ꢀ3
0.50 ꢀ3
0.25 ꢀ3
0.25 ꢀ3
0.25 ꢀ3
0.19 ꢀ3
0.19 ꢀ3
0.13 ꢀ3
Dmax
Lmax
11.0
11.0
11.0
14.0
14.0
20.5
20.5
20.5
20.5
(V/µs)
4.0
4.0
4.0
4.0
4.0
2.0
2.0
2.0
2.0
(V2/µs)
0.40 ꢀ3
0.40 ꢀ3
0.40 ꢀ3
0.40 ꢀ3
0.40 ꢀ3
0.20 ꢀ3
0.20 ꢀ3
0.20 ꢀ3
0.20 ꢀ3
Dmax
5.0
Lmax
11.0
14.0
14.0
14.0
20.5
20.5
20.5
28.0
28.0
33.0
(V/µs)
4.0
4.0
4.0
4.0
2.0
2.0
2.0
1.5
1.5
1.0
0.33 µF
0.47 µF
0.68 µF
1.0 µF
1.5 µF
2.2 µF
3.3 µF
4.7 µF
6.8 µF
10.0 µF
A50DF 3330--6--
A50DH 3470--6--
A50DH 3680--6--
A50DH 4100--6--
A50DK 4150--6--
A50DK 4220--6--
A50DK 4330--6--
A50DQ 4470--6--
A50DQ 4680--6--
A50DT 5100--6--
0.47 µF
0.68 µF
1.0 µF
1.5 µF
2.2 µF
3.3 µF
4.7 µF
6.8 µF
10.0 µF
5.0
5.0
A50CF 3470--0--
A50CF 3680--0--
A50CF 4100--0--
A50CH4150--0--
A50CH4220--0--
A50CK4330--0--
A50CK4470--0--
A50CK4680--0--
A50CK 5100--0--
6.0
6.0
6.5
7.0
7.0
6.5
8.0
8.0
7.5
9.5
8.5
9.5
10.0
12.0
11.0
11.5
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
09/2008
21