3260
2-WIRE, CHOPPER-STABILIZED,
PRECISION HALL-EFFECT BIPOLAR SWITCH
The A3260-- Hall-effect bipolar switch is an extremely
Suffix Code 'LH' Pinning
temperature-stable and stress-resistant sensor especially suited for
operation over extended temperature ranges to +150°C. Superior
high-temperature performance is made possible through dynamic
offset cancellation, which reduces the residual offset voltage normally
caused by device overmolding, temperature dependencies, and thermal
stress.
(SOT23W)
3
The device includes on a single silicon chip a voltage regulator,
Hall-voltage generator, small-signal amplifier, chopper stabilization,
Schmitt trigger, and a constant-current open-collector output. A south
pole of sufficient strength will turn the output OFF. An on-board
regulator permits operation with supply voltages of 3.5 to 24 volts.
Noise radiation is limited by control of the output current slew rate.
NC
1
2
The first character of the part number suffix determines the device
operating temperature range; suffix ‘E–’ is -40°C to +85°C and ‘L–’ is
-40°C to +150°C. Three package styles provide a magnetically opti-
mized package for most applications. Suffix ‘–LH’ is a miniature
SOT23W low-profile surface-mount package, ‘–LT’ is a miniature
SOT89/TO-243AA transistor package for surface-mount applications;
while suffix ‘–UA’ is a three-lead ultra-mini-SIP for through-hole
mounting.
Dwg. PH-003-5
Pinning is shown viewed from branded side.
ADVANCE INFORMATION
(subject to change without notice)
December 6, 2002
FEATURES
■ Internal Current Regulator for 2-Wire Operation
■ Output Slew Rate Controlled
■ Resistant to Physical Stress
■ Superior Temperature Stability
■ Operation From Unregulated Supply
■ Reverse Battery Protection
■ Solid-State Reliability
ABSOLUTE MAXIMUM RATINGS
at T =+25°C
A
Supply Voltage, VCC ........................... 27 V
Reverse Battery Voltage, VRCC .......... -16 V
Magnetic Flux Density, B ........... Unlimited
Package Power Dissipation, PD . See Graph
Junction Temperature, TJ ............... +170°C
Operating Temperature Range, TA
■ Small Size
Suffix ‘E–’.................. -40°C to +85°C
Suffix ‘L–’................ -40°C to +150°C
Storage Temperature Range,
Always order by complete part number: the prefix 'A' + the basic four-digit
part number + a suffix to indicate operating temperature range +
a suffix to indicate package style, e.g., A3260ELH .
TS .............................. -65°C to +170°C