2 917
DUAL FULL-BRIDGE
PWM MOTOR DRIVER
The UDN2917EB motor driver is designed to drive both windings
of a bipolar stepper motor or bidirectionally control two dc motors. Both
bridges are capable of sustaining 45 V and include internal pulse-width modula-
tion (PWM) control of the output current to 1.5 A.
GND
GND
7
8
39
38
37
36
For PWM current control, the maximum output current is determined by the
user’s selection of a reference voltage and sensing resistor. Two logic-level
inputs select output current limits of 0, 33%, 67%, or 100% of the maximum
level. A PHASE input to each bridge determines load current direction. Active-
low ENABLE inputs control the four drivers in each bridge.
PWM 1
9
1
10
11
12
13
14
15
16
17
35
34
33
32
31
30
2
The bridges include both ground clamp and flyback diodes for protection
against inductive transients. Internally generated delays prevent cross-over
currents when switching current direction. Special power-up sequencing is not
required. Thermal protection circuitry disables the outputs if the chip tempera-
ture exceeds safe operating limits.
PWM 2
GND
GND
29
The UDN2917EB is supplied in a 44-lead power PLCC for surface-mount
applications. Its batwing construction provides for maximum package power
dissipation in the smallest possible construction. The UDN2917EB is available
for operation from -40°C to +85°C. To order, change the prefix from 'UDN' to
'UDQ'. This device is also available on special order for operation to +125°C.
Dwg. PP-021
Dwg. PP-021
ABSOLUTE MAXIMUM RATINGS
at TJ ≤ +150°C
Motor Supply Voltage, VBB ....................45 V
Output Current, IOUT (tw ≤ 20 µs) ..... 1.75 A
(Continuous) ............................... 1.5 A
Logic Supply Voltage, VCC ....................7.0 V
Logic Input Voltage Range,
FEATURES
I 1.5 A Continuous Output Current
I 45 V Output Sustaining Voltage
I Internal Clamp Diodes
I Digital Control of Output Current
I Internal Thermal Shutdown Circuitry
I Similar to Dual PBL3770
VIN ................................ -0.3 V to +7.0 V
Output Emitter Voltage, VE ...................1.0 V
Package Power Dissipation,
PD ......................................... See Graph
Operating Temperature Range,
TA .................................. -20°C to +85°C
Storage Temperature Range,
TS ................................ -55°C to +150°C
Output current rating may be limited by duty cycle,
ambient temperature, and heat sinking. Under any
set of conditions, do not exceed the specified peak
current rating or a junction temperature of +150°C.
Always order by complete part number: UDN2917EB .