A2919SLB

更新时间： 2024-11-22 22:38:43

品牌	Logo	应用领域
急速微 - ALLEGRO		驱动器运动控制电子器件信号电路光电二极管电动机控制
页数	文件大小	规格书
8页	100K
描述
DUAL FULL-BRIDGE PWM MOTOR DRIVER

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

A2919SLB 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	SOIC	包装说明：	SOP, SOP24,.4
针数：	24	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.85	Is Samacsys：	N
其他特性：	ALSO REQUIRES 10V TO 45V VBB SUPPLY	模拟集成电路 - 其他类型：	STEPPER MOTOR CONTROLLER
JESD-30 代码：	R-PDSO-G24	JESD-609代码：	e0
长度：	15.4 mm	功能数量：	1
端子数量：	24	最高工作温度：	85 °C
最低工作温度：	-40 °C	最大输出电流：	1 A
封装主体材料：	PLASTIC/EPOXY	封装代码：	SOP
封装等效代码：	SOP24,.4	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	240
电源：	5 V	认证状态：	Not Qualified
座面最大高度：	2.65 mm	子类别：	Motion Control Electronics
最大供电电流 (Isup)：	50 mA	最大供电电压 (Vsup)：	5.25 V
最小供电电压 (Vsup)：	4.75 V	标称供电电压 (Vsup)：	5 V
表面贴装：	YES	技术：	BIPOLAR
温度等级：	INDUSTRIAL	端子面层：	TIN LEAD
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	30
宽度：	7.5 mm	Base Number Matches：	1

A2919SLB 数据手册

2919

DUAL FULL-BRIDGE

MOTOR DRIVER

2919

DUAL FULL-BRIDGE

PWM MOTOR DRIVER

The A2919SB and A2919SLB motor drivers are designed to drive

both windings of a bipolar stepper motor or bidirectionally control two

dc motors. Both bridges are capable of sustaining 45 V and include

internal pulse-width modulation (PWM) control of the output current to

750 mA. The outputs have been optimized for a low output-saturation

voltage drop (less than 1.8 V total source plus sink at 500 mA).

A2919SB

LOAD

SUPPLY

OUT

SENSE

For PWM current control, the maximum output current is deter-

mined by the user’s selection of a reference voltage and sensing

resistor. Two logic-level inputs select output current limits of 0%, 41%,

67%, or 100% of the maximum level. A PHASE input to each bridge

determines load current direction.

SENSE

OUT

GROUND

The bridges include both ground clamp and flyback diodes for

protection against inductive transients. Internally generated delays

prevent cross-over currents when switching current direction. Special

power-up sequencing is not required. Thermal protection circuitry

disables the outputs if the chip temperature exceeds safe operating

limits.

GROUND

PHASE

REF 1

REF 2

The A2919SB is supplied in a 24-pin dual in-line plastic batwing

package with a copper lead-frame and heat sinkable tabs for improved

power dissipation capabilities. The A2919SLB is supplied in a 24-lead

surface-mountable SOIC. Their batwing construction provides for

maximum package power dissipation in the smallest possible construc-

tion. The A2919SB/SLB are available for operation from -40°C to

+85°C. To order, change the suffix from 'S–' to 'E–'. These devices

are also available on special order for operation to +125°C. For

applications not requiring quarter-step operation, but desire lower

detent or running current, the similar UDN2916B/EB/LB may be pre-

ferred.

LOGIC

SUPPLY

Dwg. PP-005

ABSOLUTE MAXIMUM RATINGS

at T_J≤ 150°C

Motor Supply Voltage, V ................... 45 V

Output Current, I

OUT

(Peak, t_w≤ 20 µs) ........................ ±1.0 A

(Continuous) .......................... ±750 mA

FEATURES

Logic Supply Voltage, V ................... 7.0 V

■ 750 mA Continuous Output Current

■ 45 V Output Sustaining Voltage

■ Internal Clamp Diodes

Logic Input Voltage Range,

............................... -0.3 V to +7.0 V

Output Emitter Voltage, V .................. 1.5 V

Package Power Dissipation,

■ Internal PWM Current Control

....................................... See Graph

■ Low Output Saturation Voltage

Operating Temperature Range,

■ Internal Thermal Shutdown Circuitry

■ Half- or Quarter-Step Operation of Bipolar Stepper Motors

T ................................. -20°C to +85°C

Storage Temperature Range,

T ............................... -55°C to +150°C

Always order by complete part number:

Part Number

A2919SB

Package

R_θJA

R_θJT

Output current rating may be limited by duty cycle,

ambient temperature, and heat sinking. Under any

set of conditions, do not exceed the specified peak

current rating or a junction temperature of +150°C.

24-Pin DIP

24-Lead SOIC

40°C/W

55°C/W

6.0°C/W

A2919SLB

12 3 4 5 6 7 8

中文翻译

下载PDF

A2919SLB 替代型号

型号	品牌	替代类型	描述	数据表
A2919SLBTR	ALLEGRO	完全替代	Stepper Motor Controller, 1A, BIPolar, PDSO24, BATWING, SOIC-24
A2919SLB-T	ALLEGRO	完全替代	DUAL FULL-BRIDGE PWM MOTOR DRIVER

与A2919SLB相关器件

型号	品牌	获取价格	描述	数据表
A2919SLB-T	ALLEGRO	获取价格	DUAL FULL-BRIDGE PWM MOTOR DRIVER
A2919SLBTR	ALLEGRO	获取价格	Stepper Motor Controller, 1A, BIPolar, PDSO24, BATWING, SOIC-24
A2919SLBTR-T	ALLEGRO	获取价格	DUAL FULL-BRIDGE PWM MOTOR DRIVER
A2927SEB	ALLEGRO	获取价格	DUAL FULL-BRIDGE PWM MOTOR DRIVER
A29400	AMICC	获取价格	512K X 8 Bit / 256K X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
A29400A	AMICC	获取价格	512K X 8 Bit / 256K X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
A29400ATV-55F	AMICC	获取价格	512K X 8 Bit / 256K X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
A29400ATV-55UF	AMICC	获取价格	512K X 8 Bit / 256K X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
A29400AUV-55F	AMICC	获取价格	512K X 8 Bit / 256K X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory
A29400AUV-55UF	AMICC	获取价格	512K X 8 Bit / 256K X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory

与A2919SLB相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

35
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

26
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

54
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

52

产品中心

服务支持

精选活动

关于我们

帮助中心

A2919SLB

A2919SLB 技术参数

A2919SLB 数据手册

A2919SLB 替代型号

与A2919SLB相关器件

与A2919SLB相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

A2919SLB

A2919SLB 技术参数

A2919SLB 数据手册

A2919SLB 替代型号

与A2919SLB相关器件

与A2919SLB相关文章

您还可以找

您在本页遇到什么问题？