High Precision Programmable Linear Hall Effect Sensor IC
with EEPROM, Analog Output, and Advanced Output Linearization
A1340
MAGNETIC CHARACTERISTICS: valid across full operating temperature range, TA, and supply voltage range, VCC
BYPASS = 10 nF; unless otherwise specified
,
C
Characteristics
Symbol
Test Conditions
Min.
Typ.
Max.
Unit1
Factory Programmed Device Values2
Magnetic Input Signal Range
Magnetic Input Signal Offset
Output Sensitivity
BIN
SENS_COARSE = 4
–
±300
0
–
G
V
BINOFFSET SIG_OFFSET = 0
–
–
Sens
SENS_MULT = 0, TA = 25°C
BIN = 0 G, TA = 25°C
8.08
2.42
8.33
2.50
8.58
2.58
mV/G
V
Quiescent Voltage Output
VOUT(Q)
VCC
VSAT(H)
–
VCLP(H)init
VCLP(L)init
–
–
V
Output Clamp Initial Voltage
–
–
–
–
–
VSAT(L)
<±0.03
<±0.02
<±0.7
–
–
–
–
–
V
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
%/°C
%/°C
mV/°C
mV/°C
Sensitivity Drift Over Temperature3
DSens
Offset (QVO) Drift Over Temperature4
11 G (gauss) = 0.1 mT (millitesla).
DVOUT(Q)
<±0.1
2Device performance is optimized for the input magnetic range of SENS_COARSE = 4 and input offset of SIG_OFFSET=0. If a different magnetic input range or signal
offset is required, please see the tables in the section EEPROM Customer-Programmable Parameter Reference, near the end of this document.
3Does not include drift over lifetime and package hysteresis.
4Offset drifts with temperature changes will be altered from the factory programmed values if Magnetic Input Signal Range is changed. If changes in Magnetic Input Signal
Range cannot be avoided because of application requirements, please contact Allegro for detailed information.
Allegro MicroSystems, LLC
115 Northeast Cutoff
6
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com