The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.54mm Pitch High Density Connector
A1 and A2 Series
■Features
1. High Density Mounting
Connectors are aligned in the longitudinal direction on the
2.54 mm mesh board, so that no idle space can occur.
2. Variation in Number of Contacts
The A1 series contains 16 types of 6 to 64 contacts, while
the A2 series contains 20 types of 1 to 20 contacts,
3. Compatibility
The A1 series is compatible with HIF3B series cable side
and HIF3H receptacle for wide applications.
■Product Specifications
Current rating: 3A
ç
ç
Operating Temperature Range: -55 to +85 (Note 1) Storage Temperature Range: -10 to +60 (Note 2)
Rating
Voltage rating: 200V AC
Operating Moisture Range:
40 to 80%
Storage Humidity Range:
40 to 70% (Note 2)
Item
Specification
Condition
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
1000M ohms min.
500V DC
No flashover or insulation breakdown.
15m ohms max.
650V AC/1 minute
0.1A
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.Humidity (Steady state) Insulation resistance 1000M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ➝15 to 35ç: 5 minutes max.➝
6. Temperature Cycle
No damage, cracks, or parts looseness.
125ç: 30 minutes➝ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
7
8
.
.
Operating Life
Contact resistance: 15m ohms max.
Solder bath: 260ç for 10 seconds
Manual soldering: 350ç for 3 seconds
Resistance to Soldering heat
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Applications
Computers, VTR, and other various kinds of electronic equipment
■Material
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
Insulator
Contact
Pin header
Contact area: gold plated
Brass
–––––––
DIP area
: tin plated
Black
Contact area
Termination area: nickel plated
Crimping socket
Crimping contact
Polyamid
UL94V-0
–––––––
: gold plated
Phosphor bronze
C2