AZ696
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• Miniature size: Form A version: 0.63" (16 mm) height,
1.10" (30 mm) length, 0.39" (10 mm) width
• High sensitivity, 100 mW pickup
• Dielectric strength 4000 Vrms
• Isolation spacing greater than 8 mm
• Approvals/Standards include: UL, CSA, VDE, IEC,
SEMKO, CEE
• 10 Amp switching capability
• Epoxy sealed for automatic wave soldering and cleaning
• UL file E44211; CSA file LR 85091
CONTACTS
GENERAL DATA
Arrangement
SPDT (1 Form C)
SPST (1 Form A)
Life Expectancy
Mechanical
Electrical
Minimum operations
10 million
1 X 105 at 10 A 240 VAC Res.
Ratings
Resistive load:
Max. switched power: 300 W or 2500 VA
Max. switched current: 10 A
Operate Time (typical) 10 ms at nominal coil voltage
Max. switched voltage: 150* VDC or 380 VAC
UL Rating: 10 A at 30 VDC resistive
10 A at 250 VAC general use
1/4 HP 120 VAC
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
1/2 HP 250 VAC
(at sea level for 1 min.) 1000 Vrms between open contacts
B 300 pilot duty
Q 300 pilot duty
*Note: If switching voltage is greater than 30 VDC, special
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
precautions must be taken. Please contact the factory.
Dropout
Greater than 10% of nominal coil voltage
Material
Silver cadmium oxide
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 110°C (230°F)
Resistance
< 30 milliohms initially
(at rated current, voltage drop method)
Vibration
0.062" DA at 10–55 Hz
20 g
COIL
Shock
Power
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
At Pickup Voltage
(typical)
100 mW
Terminals
Max. Continuous
Dissipation
1.5 W at 20°C (68°F) ambient
1.2 W at 40°C (104°F) ambient
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Temperature Rise
Temperature
20°C (36°F) at nominal coil voltage
Max. 110°C (230°F)
80°C (176°F)
Max. Immersion Time 30 seconds
Weight 14 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
2/28/01W