954 Series SC Connectors
Amphenol’s premier high performance fiber
optic 954 Series SC connectors utilize a push pull
retention feature enabling easy insertion and
removal, making it ideally suited for high-density
applications. The SC connector features an
internal cavity and epoxy injection tube that
virtually eliminates the possibility of improper
epoxy application, thus providing higher
manufacturing yields and superior quality.
Amphenol’s 954 Series SC connectors are
compliant to the EIA/TIA-604, IEC 60874, and
fully tested by a third party test lab per Telcordia
GR-326 specifications.
Features/Benefits
Specifications
•
•
Third party tested per Telcordia GR-326
Insertion Loss: ≤ 0.15dB typical, singlemode
≤ 0.30dB typical, APC
Easy push pull coupling mechanism enables quick
installation and the audible click signifies when
connector is locked in place
≤ 0.35dB typical, multimode
Return Loss: Ultra (UPC)
≤ -55dB*
≤ -65dB*
•
•
Pull proof design prevents signal interruption
Teflon tube in rear of connector insures clean epoxy
injection
Angle (APC)
Durability:
< 0.2dB change, 500mating cycles
•
•
Duplex version utilizes a removable flexible clip
providing a float between channels A and B
High temperature and UL 94-V0 rated plastic
housing and boots available in multiple colors
Temperature: <0.3dB change, -40 to +85°C
Intermateability:
The Amphenol 954 Series SC Connectors are
mechanically and optically intermateable with NTT-
SC type products and conform to JIS, ANSI, TIA/EIA,
IEC, and Telcordia specifications.
•
•
Tight tolerance ferrules for low loss performance
Available in singlemode, angled singlemode, and
multimode versions
•
Available with 900µm, 2.0mm, 3.0mm, and 90
degree boots in multiple colors
*Performance is polish dependent
www.amphenol-fiberoptics.com
sales@amphenol-fiberoptics.com
Customer Service 800-944-6446
R2