94SVP
Vishay OS-CON
Vertical Surface Mounting Capacitors
FEATURES
• New Vishay OS-CON series as results of
polymerized
electrolyte
organic
semiconductor
as
RoHS
• Features superior heat-proof characteristics
compared with previously developed Vishay
OS-CON series
COMPLIANT
• Particularly effective when used as surface mounting
devices of the switching power supply
• Rated ripple current values are guaranteed at 105 °C
• No need to consider derating on maximum allowable ripple
current
Fig.1 Component outline
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Operating Temperature Range
- 55 °C to + 105 °C
Capacitance Tolerance at 120 Hz
M: 20 ꢀ
Tangent of Loss Angle (tan δ) at 120 Hz
Leakage Current (µA/2 minutes) (or less)*
Equivalent Series Resistance (Ω), (100 k to 300 kHz)
Values in Standard Ratings Table
Values in Standard Ratings Table
Values in Standard Ratings Table
Characteristics at high temp. and low temp.
Impedance Ratio at 100 kHz, + 20 °C
- 55 °C
+ 105 °C
ΔC/C
tan δ
ESR
Z/Z20 °C
Z/Z20 °C
1.0 to 1.25
0.75 to1.0
Endurance + 105 °C, 2000 hours
Rated Voltage Applied (25 WV to 20 V)
(1000 hours for A5/B6 sizes)
Within 20 ꢀ
≤ 1.5 x the value of Tangent of Loss Angle
≤ 1.5 x the value of ESR
Leakage Current
ΔC/C
≤ The Value of Leakage Current
Within 20 ꢀ
Damp heat (Steady state)
tan δ
ESR
≤ 1.5 x the value of Tangent of Loss Angle
≤ 1.5 x the value of ESR
(+ 60 °C, 90 to 95 ꢀ RH, 1000 hours, no voltage)
(500 hours for A5/B6 sizes)
Leakage Current
≤ The Value of Leakage Current after Voltage
Treatment
Reverse Voltage Guarantee
Temporary: < 20 ꢀ of the rated voltage
Continuous: < 10 ꢀ of the rated voltage
ΔC/C
tan δ
ESR
Within 10 ꢀ
Solder heat resistance (VPS)**
(215 °C x 90 s) or (230 °C x 60 s)
(Please consult us for A5/B6 sizes)
≤ 1.3 x the value of Tangent of Loss Angle
≤ 1.3 x the value of ESR
Leakage Current
≤ The Value of Leakage Current after Voltage
Treatment
* If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage Treatment: The rated voltage is applied to Vishay
OS-CON (2.5 to 20 WV) for 120 minutes at 105 °C. (However, 20 V is applied to a 25 WV Vishay OS-CON).
** Refer to Standard Ratings table for soldering recommendation.
DIMENSIONS in millimeters
DIMENSIONS in millimeters
SIZE
CODE
∅ D
ꢀ0. max0
L
W
ꢀ0ꢁ
H
ꢀ0ꢁ
C
ꢀ0ꢁ
P
ꢀ0ꢁ
R
A5
B6
4.0
5.5
6.0
4.3
5.3
4.3
5.3
6.6
8.3
5.0
6.0
7.3
9.0
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
1.0
5.0
6.3
1.4
2.1
3.2
4.6
3.2
4.6
C6
6.0
6.6
Ø D
E7
8.0
7.0
8.3
F8
10.0
8.0
8.0
10.3
8.3
10.3 11.0 0.5 to 0.8
8.3 9.0 0.8 to 1.1
10.3 11.0 0.8 to 1.1
E12
F12
12.0
12.7
10.0
10.3
www.vishay.com
308
For technical questions contact: aluminumcaps4@vishay.com
Document Number: 90021
Revision: 26-Jun-06