94SVPD
Vishay OS-CON
www.vishay.com
SMD Aluminum Solid Capacitors with Conductive Polymer
FEATURES
• New OS-CON 94SVPD series provides
improved characteristics with up to 125 °C
temperature capability and 35 V maximum
voltage rating in a SMD package
• Improved damp heat (steady state) 85 °C x 85 %
RH performance
• Suitable for use in smoothing circuits of vehicle-mounted
equipment, industrial equipment, etc.
• This product can support lead (Pb)-free reflow (2)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
CONDITIONS
VALUE
Operating temperature range
Capacitance tolerance
Tangent of loss angle (tan )
Leakage current (μA/2 min) (or less) (1)
ESR
-
120 Hz
120 Hz
After 2 min
-
- 55 °C to + 125 °C
M: 20 %
values in Electrical Data and Ordering Information table
values in Electrical Data and Ordering Information table
values in Electrical Data and Ordering Information table
- 55 °C
+ 125 °C
C/C
Z/Z20 °C
Z/Z20 °C
0.75 to 1.25
0.75 to 1.0
Characteristics of impedance ratio
at high and low temperature
100 kHz, + 20 °C
Within 20 %
tan
ESR
Leakage current
C/C
tan
ESR
Leakage current
C/C
2 x or < than an initial standard
2 x or < than an initial standard
Below an initial standard
Within 20 %
2 x or < than an initial standard
2 x or < than an initial standard
Below an initial standard
Within 10 %
+ 125 °C, 2000 h
rated voltage applied
Endurance
+ 85 °C, 85 % to 90 % RH,
1000 h
rated voltage applied
Damp heat (steady state)
tan
ESR
1.3 x or < than an initial standard
1.3 x or < than an initial standard
(VPS)
(230 °C x 75 s)
Solder heat resistance (2)
Below an initial standard
(after voltage procesing)
Leakage current
Notes
(1)
If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage treatment: The rated voltage is applied (10 V to
35 V) for 120 min at 125 ºC.
(2)
Refer to “Recommended Reflow Profile” for maximum temperatures.
DIMENSIONS in millimeters
0.2 max.
W
R
Polarity marking (Cathode)
Case No.
Series
003
C6 size is PD
E7, F8, E12, F12
size is SVPD
SVPD
47
35
Rated capacitance
Rated voltage
L
(+)
SIZE CODE
Ø D ꢀ0.
6.3
8.0
10.0
8.0
L + ꢀ01/- ꢀ04
W
ꢀ0ꢁ
6.6
8.3
H
ꢀ0ꢁ
6.6
8.3
C
ꢀ0ꢁ
7.3
9.0
R
P
ꢀ0ꢁ
2.1
3.2
4.6
3.2
4.6
C6
E7
F8
E12
F12
5.9
6.9
7.9
11.9
12.6
0.6 to 0.8
0.6 to 0.8
0.6 to 0.8
0.8 to 1.1
0.8 to 1.1
10.3
8.3
10.3
10.3
8.3
10.3
11.0
9.0
11.0
10.0
Revision: 03-Aug-12
Document Number: 90022
1
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000