RJ-45 EtherNet/IP*
FEATURES AND SPECIFICATIONS
Overmolded Cordsets,
IDT and PCB Receptacles
Reliably Connect to EtherNet Devices, Even in
Harsh Environments, with Molex’s RJ-45
Industrial EtherNet/IP Cordsets
84702
RJ-45 Ethernet/IP Cordsets and Receptacles are ideal
for use in environments where EtherNet protocol is
used, including manufacturing facilities, water
treatment plants and transportation hubs. Designed
with one sealing surface, the connectors ensure
optimum performance even in harsh environments.
The overmolded cordsets and IDT and PCB receptacles
meet the EtherNet/IP Specifications of both the Open
DeviceNet† Vendors Association and ControlNet‡ Vendors
Association.
*EtherNet/IP and †DeviceNet are trademarks of the Open DeviceNet Vendor
Association. For more information, visit: www.odva.org
‡ControlNet is a trademark of ControlNet International, Ltd. For more
information, visit: www.controlnet.org
(Left to right) Punchdown Receptacle (side view), Overmolded Cordset and PCB Mounting Receptacle
Features and Benefits
I One sealing surface reduces chance of failure
I Bayonet style latch receptacle provides quick and
easy connections as well as ensures proper depth
when mating
I IP 67 and NEMA 6P ratings ensure cordsets are
water and dust tight for functional integrity
I Category 5e specified§ provides high data-
transmission speeds
I Overmolded versus field wireable cordsets allow
faster installation at customer site
§Note: Category 5e specified for: Industrial EtherNet RJ-45 Panel Mounting
Receptacle, Punchdown Receptacle and RJ-45 Molded Cordsets
(Left to right) Punchdown Receptacle (bottom view), Overmolded Cordset and top view of PCB Mounting
Receptacle
SPECIFICATIONS
Reference Information
Packaging: Bag
Mates With: 84700 series
Designed In: Inches
Mechanical
Durability: 200 Cycles
Physical
Housing: PBT Polyester, black
Contact: Phosphor Bronze (CuSn)
Plating:
Contact Area — 1.27µm (50µ") Gold (Au)
Underplating — Nickel (Ni)
Operating Temperature: -40 to +85°C
Coupling Ring Destructive Torque:
2.26 N-M (20 in-lbs. or more)
Lock Nut Destructive Torque (Receptacles):
2.71 N-M (24 in-lbs. or more)
Wire Range (Punchdown Receptacle): 22 to 26 AWG
solid and stranded, limiting Outside Diameter
1.40 mm (0.055”)
Electrical
Voltage: 150V AC (125V AC for receptacles)
Current: 1.5A
Contact Resistance: 20 mȑ max.
Dielectric Withstanding Voltage:
1,000 VAC (adjacent contacts)
1,500 VAC (contacts to ground)
Insulation Resistance: 500 Mȑ min.