82-530

更新时间： 2024-11-11 12:53:35

品牌	Logo	应用领域
安费诺 - AMPHENOL		连接器射频C型连接器
页数	文件大小	规格书
1页	80K
描述
Assembly Instructions-C16 C - Two-Stud Bayonet Lock

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

82-530 数据手册

Assembly Instructions-C16

C - Two-Stud Bayonet Lock

Amphenol^®

Slide nut and gasket over cable and cut jacket to dimension a.

Comb out braid and fold out. Cut cable dielectric to dimension b.

Pull braid wires forward and taper toward center conductor. Place

clamp over braid and push back against cable jacket.

Fold back braid wires as shown, trim to proper length and form over

clamp as shown. Solder contact to center conductor. Dimension d

should be as shown.

Insert cable and parts into connector body. Make sure sharp edge of

clamp seats properly in gasket. Tighten nut. End of contact in plug

should be flush with insulator. There should be a clearance of .010"

(.25mm) between end of contact and insulator in jack.

Stripping dims. ±1/64 (0.4) inches (millimeters)

Amphenol

Part #

82-530

82-532

d (ref)

3/64 (1.2)

9/32 (7.1)

1/8 (3.2)

5/32 (4.0)

19/23 (15.1) 7/16 (11.1) 5/32 (4.0) 11/32 (8.7)

• For armored cable slide cap over armor first. Push armor and cap

back out of way and proceed with assembly as directed above

using armor clamp in place of standard clamp nut. When assembly

is complete, straighten bulge in armor and trim so that it can be

clamped between nut and cap.

Amphenol Corporation Tel: 800-627-7100

www.amphenolrf.com

290

中文翻译

下载PDF

型号	品牌	获取价格	描述	数据表
82530-6	INTEL	获取价格	SERIAL COMMUNICATIONS CONTROLLER (SCC)
82531040	WURTH	获取价格	1206 SMD VARISTOR
82531140	WURTH	获取价格	1206 SMD VARISTOR
82531400	WURTH	获取价格	1206 SMD VARISTOR
82-532	AMPHENOL	获取价格	Assembly Instructions-C16 C - Two-Stud Bayonet Lock
82532250	WURTH	获取价格	HIGH SURGE 2220 SMD VARISTOR
82532300	WURTH	获取价格	HIGH SURGE 2220 SMD VARISTOR
82533300	WURTH	获取价格	HIGH SURGE 1210 SMD VARISTOR
8253-5	INTEL	获取价格	PROGRAMMABLE INTERVAL TIMER
8253-5/BJA	ETC	获取价格	Analog Timer Circuit