Series 80 “Mighty Mouse”
ASAP Cordsets For Ethernet, IEEE 1394 and USB 2.0
ASAP Cordsets For High Speed Serial Data
A
B
C
D
E
F
Upgrade commercial high speed
serial interconnects to mil-spec
performance. Glenair’s ASAP “Mighty
Mouse” cordsets are available for
100BASE-T, Gigabit Ethernet, IEE
1394 and USB 2.0 applications.
These cordsets combine aerospace-
grade data cables with Series 80
“Mighty Mouse” harsh environment
connectors for maximum
FEP jackets meet FAA
flammability requirements. Or,
choose low smoke / zero halogen
polyurethane jackets for mass
transit or shipboard applications.
Three strain relief options –
Standard overmolded cables offer
excellent strain-relief and cable
sealing.Or, choose heatshrink boots
for smallest form factor. If repairability
and ruggedness are important, choose
machined aluminum EMI backshells.
performance and minimum size.
100BASE-T Cordset
with 4 Pin Series 800 Connector
HOW TO ORDER CORDSETS
Step 1: Select the Connector Series
Table1 lists the five types of Series 80 connectors. For more information on
selecting a connector, please refer to the connector selection chart on the following
page. This section does not contain ordering information for series 802 “Aqua
Mouse” cordsets. Please contact Glenair for information on hazardous environment
high pressure cables for the 802 Series.
G
H
J
Step 2: Select the Cable
Table 2 contains specifications for standard data cables. The cable type also
determines the connector layout. 4 pin connectors are used for 4 wire cables,
and 10 pin connectors are used for 8 wire cables.
Step 3: Select a Cable Jacket
Table 3 shows available jacket options. Choose FEP flourocarbon jackets
for airframe and avionics applications, or choose low smoke/zero halogen
polyurethane jackets for soldier systems, vehicles, and transit systems.
K
L
Step 4: Select a Cable-To-Connector Interface
Table 3 provides three ways to attach the cable to the connector:
1. Polyamide boot, overmolded with flexible strain relief
2. Aluminum backshell, shielded, watertight and removable
3. Heat-shrink boot, low smoke/ zero halogen
Step 5: Select a Connector Configuration
Table 1 shows connector codes for specifying plug versus receptacle and pin
versus socket contacts. Add a plating code, keying option and length.
M
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
K-1
Rev. 05-APR-2007