Series 770
Conformal Coated SIP Resistor Network
FEATURES
• High-Reliability Cermet Resistors
• Space Saving Over Individual Resistors
• Low Profile
• Available in Odd or Even Number of Pins From 4 to 12 Leads
• 0.100 inch [2.54 mm] Pin Spacing
• Resistance Range 22Ω to 1 MΩ (E-24 Series)
• Temperature Coefficient of Resistance (T.C.R.) ±100ppm/°C
• Operating Temperature to -55°C to +125°C
• Epoxy Resin Coating
• Bulk Packaging
• RoHS Compliant in Accordance with EU Directive 2005/95/EC
- Lead-Free Termination Finish
- Exemption 5 for Pb in glass material and resistor elements
ORDERING INFORMATION
770
P
NUMBER OF PINS
RoHS COMPLIANT
4 - 12 Pins Available
Lead Finish: SnAgCu
Ex. 4 = 4 pins
Ex. 10 = 10 pins
RESISTOR CODE
Resistor Tolerance is ±2% for all part numbers.
For Schematics 1 & 3, refer to available resistor table on
Page 2.
SCHEMATIC
For Schematic 5 the following format is used.
Ex. 220/330 = 220ꢀ/330ꢀ
Ex. 470/1.2k = 470ꢀ/1200ꢀ
1 - Bussed Circuit
3 - Isolated Circuit
5 - Dual Terminator Circuit
See tables below for example part numbers.
Refer to tables on Page 2 for available part numbers.
Not all pin count, schematic combinations and resistor values may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
Schematic 5 Example Part Numbers
Schematic 5 Example Part Numbers
For R1 or R2 >1k Ohms
For R1 and R2 <1k Ohms
R1
R2
R1
R2
R1/R2
Part Number
R1/R2
Part Number
(ohms) (ohms)
(ohms) (ohms)
81
130
200
270
330
81/130
100/200
180/270
220/330
77010581/130P
770105100/200P
770105180/270P
770105220/330P
470
750
1k
1k
2.3k
2k
470/1k
750/2.3k
1k/2k
770105470/1KP
770105750/2.3KP
7701051K/2KP
100
180
220
1.1k
1.5k
2.2k
3.3K
1.1k/2.2k
1.5k/3.3k
7701051.1/2.2KP *
7701051.5/3.3KP *
* CTS Part Number limited to 15 characters maximum.
First k is omitted
Document No. 008-0339-0
Page 1 - 4
Rev. A
www.ctscorp.com