SERIES 77
Lipped, Straight Shrink Boots
770-006S Long Tail Boot
How to Order
Lipped, long tail straight shrink boots provide mechanical and environmental
protection from damage and debrisꢀ Long tail boots provide additional strain relief
compared to standard length boots and are available in eight material options with
five adhesive choicesꢀ Glenair straight boots fit most standard boot adapters for
circular connectorsꢀ All adhesive lined and unlined shrink books are RoHS compliantꢀ
Shrink boots are water-tight when equipped with factory installed or user-installed
adhesiveꢀ Lipped boots lock into boot groove located on adapter and can be ordered
with potting holes or drain holes according to your requirementsꢀ Choose boot size
based on adapter diameter and cable diameterꢀ
How to Order
Sample Part Number
Product Series
770
-006
S
1
03
W1 -PP
C
770 = Series 77 shrink boot
006 = lipped boot, long tail
S = straight
Basic Number
Angular Function
Material
See material and adhesives table
Boot Size
01, 02, 03, 04, 05, 05ꢀ22, 06, 06ꢀ22, 07, 08, 09, 10, 11; see dimensions table
Omit for no adhesive; see material and adhesives table
Adhesive Lined
Potting Ports or Drain Holes
PP = potting port DH = drain hole Omit for none
Material and Adhesive Compatibility
Hot Melt Adhesives
High Performance Epoxy Adhesives
Material Description
W1
W2
W3 (TACOM approved)
R
U
(Compound No.)
High Temperature
-55°C to 125°C
Standard
-55°C to 70°C
Elastomeric
-55°C to 125°C
Pre-Coat
-75°C to 150°C
Two-Part
-75°C to 155°C
1
2
3
5
6
7
8
9
High-Performance Semi-Rigid Elastomer (2025)
Zero Halogen Semi-Rigid Polyolefin (2010)
General Purpose Flexible Polyolefin (2040)
Viton Fluoroelastomer Blend (2050)
Type U epoxy
adhesive is
compatible with all
boot materialsꢀ
Ordered separately,
user-installed
(779-00ꢁ)ꢀ Order
boot with no
adhesive liningꢀ
High Performance Elastomer Alloy (2051)
Semi-Rigid Polyolefin (2071)
Low Outgassing Fluoropolymer Alloy (2008)
Low Temp Flexible Polyolefin (2013)
Material Type 8 not available with pre-coat adhesiveꢀ Use Type U two-part epoxy
Part Number Cross Reference
NOTES
Boot
Size
Glenair
AS85049/ꢁ40
AS85049/ꢁ4ꢁ
Boot
Size
Glenair
AS85049/ꢁ40
ꢁꢀ See Modification Codes listed in
Section A for material color options
available for Type 1 (compound 2025)
materialꢀ
Part Marking
Part Marking AS85049/ꢁ4ꢁ
01
02
S0ꢁ
S0ꢂ
S03
S04
S05
S05
S06
06ꢀ22
07
S06
09
ꢁ0
ꢁꢁ
ꢁꢂ
S07
S08
S09
Sꢁ0
Sꢁꢁ
ꢁ4
ꢁ5
ꢁ6
ꢁ7
ꢁ8
03
08
04
09
05
10
05ꢀ22
06
11
ꢁ3
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog
U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice.
C-12