HcMoS 3.2x2.5mm 1.8V SMD osꢀꢁꢂꢂatꢃr
Rev. 5/2/2013
RꢃHS cꢃmpꢂꢁaꢄt / Pꢅ Free
Mꢃdeꢂ: F310 Serꢁes
http://www.foxonline.com/need_a_sample.htm
Page 1 of 2
FEATURES
• 1.8V Operation
• HCMOS Output
• Low Power Consumption
• Standby Function
• Tape and Reel (2,000 pcs. STD)
PREliMinARY
• PART nUMbER SElEcTionLearn More - Internet Required
3.2 ± 0.2
Frequency
Operating
Frequency
Model
Number
F310
Part Number
#4
#3
Stability1 Temperature (ºC) Range (MHz)
665-Frequency-xxxxx
676-Frequency-xxxxx
667-Frequency-xxxxx
758-Frequency-xxxxx
668-Frequency-xxxxx
759-Frequency-xxxxx
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
1.8432 ~ 50.000
1.8432 ~ 50.000
1.8432 ~ 50.000
1.8432 ~ 50.000
1.8432 ~ 50.000
1.8432 ~ 50.000
±100 PPM
Top
F310R ±100 PPM
F315
±50 PPM
F315R ±50 PPM
F316
±25 PPM
F316R ±25 PPM*
2.5 ± 0.2
1.2 Max
View
#2
Dot denotes #1
Pin 1
• ElEcTRicAl cHARAcTERiSTicS
MAX (unless otherwise noted)
PARAMETERS
Frequency Range (Fo)
Temperature Range (Tstg)
1.8432 ~ 50.000 MHz
-55ºC ~ +125ºC
1.8V ± 5%
1.2
Supply Voltage
Input Current
(Vdd)
(Idd)
#1
#2
Bottom
0.7
0.8
View
#4
1.8432 ~ 32.100 MHz
32.100+ ~ 50.000 MHz
7mA
15mA
#3
Output Symmetry (50% Vdd)
Rise Time (20% ~ 80% Vdd) (Tr)
1.8432 ~ 32.100 MHz
40% ~ 60%
0.9
5nS
32.100+ ~ 50.000 MHz
Fall Time (80% ~ 20% Vdd) (Tf)
1.8432 ~ 32.100 MHz
3.5nS
Recommended
Solder Pad Layout
5nS
32.100+ ~ 50.000 MHz
3.5nS
1.4
Output Voltage
(Vol)
(Voh)
(Iol)
(Ioh)
20% Vdd
80% Vdd Min
2mA Min
-2mA Min
15pF
1.2
Output Current
0.5
#1
Output Load
(HCMOS)
Standby Current
Start-up Time
10µA
10mS
300nS
10mS
(Ts)
1.0
Output Disable Time 2
Output Enable Time 2
All dimensions are in millimeters.
Maximum Soldering Temp/Time
Moisture Sensitivity Level (MSL)
Termination Finish
260ºC / 10 Seconds
1
Au
Pin Connections
#1 E/D
#2 GnD
#3 output
#4 V DD
1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,
shock, and vibration. *Excludes Shock/Vibration
2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
Note: A 0.01µF bypass capacitor should be placed between Vdd (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
• EnAblE / DiSAblE FUncTion
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary.
All specifications subject to change without notice.
INH (Pin 1)
OUTPUT (Pin 3)
ACTIVE
ACTIVE
OPEN 2
'1' Level Vih ≥ 70% Vdd
'0' Level Vil ≤ 30% Vdd
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com
EMEA Tel: +44 .1283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079
© 2013 FOX ELECTRONICS | An Integrated Device Technology, Inc. company | ISO9001:2008 Certified