Datasheet > 74HC193PW-Q100

74HC193PW-Q100

更新时间： 2024-11-17 15:28:43

品牌	Logo	应用领域
恩智浦 - NXP		光电二极管逻辑集成电路触发器
页数	文件大小	规格书
29页	190K
描述
IC BINARY COUNTER, Counter

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

74HC193PW-Q100 技术参数

生命周期：	Transferred	零件包装代码：	TSSOP
包装说明：	TSSOP,	针数：	16
Reach Compliance Code：	unknown	HTS代码：	8542.39.00.01
风险等级：	5.59	计数方向：	BIDIRECTIONAL
系列：	HC/UH	JESD-30 代码：	R-PDSO-G16
长度：	5 mm	负载/预设输入：	YES
逻辑集成电路类型：	BINARY COUNTER	工作模式：	SYNCHRONOUS
位数：	4	功能数量：	1
端子数量：	16	最高工作温度：	125 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	TSSOP	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	传播延迟（tpd）：	325 ns
筛选级别：	AEC-Q100	座面最大高度：	1.1 mm
最大供电电压 (Vsup)：	6 V	最小供电电压 (Vsup)：	2 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	CMOS	温度等级：	AUTOMOTIVE
端子形式：	GULL WING	端子节距：	0.65 mm
端子位置：	DUAL	触发器类型：	POSITIVE EDGE
宽度：	4.4 mm	最小 fmax：	15 MHz
Base Number Matches：	1

74HC193PW-Q100 数据手册

74HC193-Q100; 74HCT193-Q100

Presettable synchronous 4-bit binary up/down counter

Rev. 1 — 12 July 2013

Product data sheet

1. General description

The 74HC193-Q100; 74HCT193-Q100 is a 4-bit synchronous binary up/down counter.

Separate up/down clocks, CPU and CPD respectively, simplify operation. The outputs

change state synchronously with the LOW-to-HIGH transition of either clock input. If the

CPU clock is pulsed while CPD is held HIGH, the device counts up. If the CPD clock is

pulsed while CPU is held HIGH, the device counts down. Only one clock input can be held

HIGH at any time to guarantee predictable behavior. The device can be cleared at any

time by the asynchronous master reset input (MR). It may also be loaded in parallel by

activating the asynchronous parallel load input (PL). The terminal count up (TCU) and

terminal count down (TCD) outputs are normally HIGH. When the circuit has reached the

maximum count state of 15, the next HIGH-to-LOW transition of CPU causes TCU to go

LOW. TCU remains LOW until CPU goes HIGH again, duplicating the count up clock.

Likewise, the TCD output goes LOW when the circuit is in the zero state and the CPD

goes LOW. The terminal count outputs duplicate the clock waveforms and can be used as

the clock input signals to the next higher-order circuit in a multistage counter. Multistage

counters are not fully synchronous, since there is a slight delay time difference added for

each stage that is added. The counter may be preset by the asynchronous parallel load

capability of the circuit. Information on the parallel data inputs (D0 to D3), is loaded into

the counter. This information appears on the outputs (Q0 to Q3) regardless of the

conditions of the clock inputs when the parallel load (PL) input is LOW. A HIGH level on

the master reset (MR) input disables the parallel load gates. It overrides both clock inputs

and sets all outputs (Q0 to Q3) LOW. If one of the clock inputs is LOW during and after a

reset or load operation, the next LOW-to-HIGH transition of that clock is interpreted as a

legitimate signal and it is counted. Inputs include clamp diodes that enable the use of

current limiting resistors to interface inputs to voltages in excess of V_CC

This product has been qualified to the Automotive Electronics Council (AEC) standard

Q100 (Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

 Automotive product qualification in accordance with AEC-Q100 (Grade 1)

 Specified from 40 C to +85 C and from 40 C to +125 C

 Input levels:

 For 74HC193-Q100: CMOS level

 For 74HCT193-Q100: TTL level

 Synchronous reversible 4-bit binary counting

 Asynchronous parallel load

 Asynchronous reset

 Expandable without external logic

 Complies with JEDEC standard no. 7A

12 3 4 5 6 7...29

中文翻译

下载PDF

与74HC193PW-Q100相关器件

型号	品牌	获取价格	描述	数据表
74HC193PW-Q100J	NXP	获取价格	74HC(T)193-Q100 - Presettable synchronous 4-bit binary up/down counter TSSOP 16-Pin
74HC193-Q100	NEXPERIA	获取价格	Presettable synchronous 4-bit binary up/down counter
74HC194	NXP	获取价格	4-bit bidirectional universal shift register
74HC194D	NXP	获取价格	4-bit bidirectional universal shift register
74HC194D,652	NXP	获取价格	74HC(T)194 - 4-bit bidirectional universal shift register SOP 16-Pin
74HC194D,653	NXP	获取价格	74HC(T)194 - 4-bit bidirectional universal shift register SOP 16-Pin
74HC194D/T3	NXP	获取价格	IC HC/UH SERIES, 4-BIT BIDIRECTIONAL PARALLEL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT,
74HC194DB	NXP	获取价格	IC HC/UH SERIES, 4-BIT BIDIRECTIONAL PARALLEL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT,
74HC194DB-T	NXP	获取价格	IC HC/UH SERIES, 4-BIT BIDIRECTIONAL PARALLEL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT,
74HC194D-T	NXP	获取价格	IC HC/UH SERIES, 4-BIT BIDIRECTIONAL PARALLEL IN PARALLEL OUT SHIFT REGISTER, TRUE OUTPUT,

与74HC193PW-Q100相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

17
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

12
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

42
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

35

产品中心

服务支持

精选活动

关于我们

帮助中心

74HC193PW-Q100

74HC193PW-Q100 技术参数

74HC193PW-Q100 数据手册

与74HC193PW-Q100相关器件

与74HC193PW-Q100相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

74HC193PW-Q100

74HC193PW-Q100 技术参数

74HC193PW-Q100 数据手册

与74HC193PW-Q100相关器件

与74HC193PW-Q100相关文章

您还可以找

您在本页遇到什么问题？