73M1822/73M1922 MicroDAA
Silicon DAA with Serial Interface
DATA SHEET
Simplifying System Integration™
DS_1x22_001
DESCRIPTION
April 2010
APPLICATIONS
The 73M1822 MicroDAA is the world’s first
single-package silicon Data Access Arrangement
(DAA) for data/fax modem and voice applications.
It provides a serial Modem Analog Front End
(MAFE) interface to popular DSP/host processors to
implement a globally compliant low-cost soft modem
solution.
•
•
•
•
•
•
V.92 modems
Satellite Set Top Boxes
Fax/Multifunction Peripherals (MFP)
Point of Sale Terminals
Voicemail Systems
Industrial and medical telemetry
FEATURES
The 73M1822 MicroDAA is available as a
two-chip configuration (the 73M1922) that consists
of a 73M1902 Host-Side Device and a 73M1912
Line-Side Device. The MicroDAA integrates all
codec and DAA functions necessary to achieve
reliable PSTN connection worldwide.
•
Meets FCC, ETSI ES 203 021-2, JATE, NET4
and other PTT standards
•
•
•
•
•
•
•
•
•
•
Configurable PSTN termination
Up to 8 mA minimum line current operation
0 dBm Transmit/Receive full scale
THD –80 dB
16-bit codec up to 16 kHz sample rate
Up to 56 Kbps (V.92) performance
Configurable sample rates (7.2 – 16 kHz)
Reference clock range of 9-40 MHz
Crystal frequency range of 9-27 MHz
The MicroDAA uses a small pulse transformer,
which can achieve more than 6 kV isolation. Power
may be supplied along with data through this barrier
interface to achieve superior performance in weak
loop current conditions. Inherently immune to RFI
and other forms of common mode interference, the
patented MicroDAA technology achieves global DAA
compliance with unparalleled flexibility, reliability,
and cost structure and requires less than 2 square
inches of a single sided PCB.
MAFE I/F with Master, Slave and Daisy
Chaining
•
•
•
•
•
•
•
•
•
•
Billing tone reject filter
Polarity reversal detection on-chip
GPIO for user-configurable I/O port
Call Progress Monitor
3.3 V Operation
Industrial temperature range (-40° to +85° C)
6 kV isolation (73M1922)
4-5 kV isolation (73M1822)
8x8 mm 42-pin QFN (73M1822)
20-pin TSSOP or 5x5 mm 32-pin QFN
(73M1922)
The MicroDAA supports Caller ID Type I and II, ring
detection, tip/ring polarity reversal detection, hook
switch control, pulse dialing, regulation of loop
current (DC mask), configurable line impedance
matching, line in use and parallel pickup detection.
The MicroDAA integrates billing tone filters, external
clock reference, audio monitor output, and requires
only a small number of low cost and commonly
available external components.
•
RoHS compliant (6/6) lead-free package
The MicroDAA incorporates a configurable sample
rate circuit to support soft modem and
DSP-based implementations of all speeds up to
V.92 (56 Kbps). Sampling rates from 7.2 kHz to
16 kHz can be easily supported.
Rev. 1.6
© 2010 Teridian Semiconductor Corporation
1