F-209 SUPPLEMENT
6QDP–032–06.0–STR–TTR–2
6QDPS–016–06.0–STR–TEU–3–B
6QDPS, 6QDP
0,635mm TWINAX CABLES
SERIES
Increased
Insertion Depth
Mates with:
SPECIFICATIONS
QMSS-DP, QFSS-DP,
QMS-DP, QFS-DP
For complete specifications see
www.samtec.com?6QDPS or
www.samtec.com?6QDP
Cable:
30 AWG
Eye Speed™ MS
twinax micro ribbon
Signal Routing:
100Ω Differential
(6QDPS)
Cable Bending Radius:
(11,11mm) 7/16" min
Plating:
APPLICATIONS
Optional
30 AWG
Eye Speed ™ MS
twinax ribbon cable
Shielding
Au over 50µ" (1,27µm) Ni
Current Rating: 1 A max
Propagation Delay:
4.67 nsec/meter
Operating Temp Range:
-20°C to +90°C
Rated @ -3dB Insertion Loss
6QDPS
Cable
Length
Skew (pair-to-pair): <10 ps/ft
Skew (within a pair): <5 ps/ft
EMI Performance:
FCC Class A
RoHS Compliant:
Yes
6" (152,4mm)
12" (304,8mm)
19.68" (0,5m)
39.37" (1m)
4.0 GHz / 8.0 Gbps
3.72 GHz / 7.44 Gbps
1.38 GHz / 2.76 Gbps
1.04 GHz / 2.08 Gbps
Differential
Pair routing
APPLICATIONS
END
NO. 1
END
NO. 2
WIRING
OPTION
SCREW
OPTION
WIRE
LENGTH
NO. OF
PAIRS
(ꢀ2,7ꢁ)
.0ꢁꢁ
TYPE
(24,ꢀ3)
.90ꢁ
Specify
Leave
blank for
no Screw
Option
–“XX.X”
= Wire Length
in Inches
(95,3mm) 03.8"
minimum
–1
= Pin 1 to
Pin 1
END
(ꢀ0,ꢀꢀ)
.090
6QDPS
= Shielded mates
with QMSS-DP/
QFSS-DP
–016,
–032,
–048,
–064
ASSEMBLIES
from chart
Processing conditions will
affect mated height.
–2
= Pin 1 to
Pin 2
–F
= End No. 1
6QDP
= Unshielded
mates with
SURFACE MOUNT
ASSEMBLY END 1
L
END TO END
Surface Mount to
Surface Mount
–S
–3
END 2
(23,88)
.940
= End No. 2
= Pin 1 to
Second
Last Pin
QMS-DP/QFS-DP
064
064
–TTR =Terminal,
Top, Notch Right
–TTL = Terminal,
Top, Notch Left
–TBR = Terminal,
Bottom, Notch Right
–TBL = Terminal,
Bottom, Notch Left
–STR = Socket,
Top, Notch Right,
–STL = Socket,
Top, Notch Left
–SBR = Socket,
Bottom, Notch Right
–SBL = Socket,
Bottom, Notch Left
Surface Mount to
Edge Mount (Terminal)
Surface Mount to
Edge Mount (Socket)
Edge Mount (Terminal) to
Edge Mount (Terminal)
Edge Mount (Terminal) to
Edge Mount (Socket)
Edge Mount (Socket) to
Edge Mount (Socket)
(21,08)
.830
–B
= Both
Ends
001
001
(20,35)
.801
–4
OAL = Wire Length + L
(18,29)
.720
= Pin 1 to
Last Pin
064
001
064
001
Wire Length
(ꢀ,27) .ꢁ0ꢁ
(17,55)
.691
001
064
001
064
(16,81)
.662
WIRING REQUIREMENTS
WIRING
OPTION
END OPTIONS
Note:
Cable lengths longer than
40.00" (1 meter) are not
001
064
001
064
TTR, TBL, STL, SBR, TEU to
TTR, TBL, STL, SBR, TED
or
TTL, TBR, STR, SBL, TED to
TTL, TBR, STR, SBL, TEU
supported with S.I. test data.
1 or 2
Note:
EDGE MOUNT
Verify part number and correct
wiring scheme with Samtec’s
Interactive Cable Builder at
www.samtec.com/cable_
builder/pitch.asp
TTL, TBR, STR, SBL, TED to
TTR, TBL, STL, SBR, TED
or
TTR, TBL, STL, SBR, TEU to
TTL, TBR, STR, SBL, TEU
ASSEMBLY
END 1
064
END 2
3 or 4
–TEU =Terminal,
Edge, Notch Up
(7,47)
.294
001
064
001
–TED =Terminal,
Edge, Notch Down
Note:
END NO. 1
(-TTL SHOWN)
END NO. 2
(-STR SHOWN)
This Series is non-standard,
non-returnable.
WWW.SAMTEC.COM