SPECIFICATION CONTROL DRAWING
3
2
1
Item #1: SEALING SLEEVE
4
Item #2: CRIMP SPLICE
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. INTEGRAL MULTI-WIRE SEAL: Low outgassing immersion resistant thermoplastic.
3. SEPARATE MULTI-WIRE SEAL: Low outgassing immersion resistant thermoplastic.
4. CRIMP SPLICE: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Nickel per SAE AMS-QQ-N-290.
Color Code: See table below.
Dimensions:
Part
Name
Crimp Splice
D
øB
øC
E
Color Code
Red
1.27 [0.050]
1.14 [0.045]
1.75 [0.069]
1.63 [0.064]
2.60 [0.102]
2.46 [0.097]
2.03 [0.080]
1.91 [0.075]
2.70 [0.106]
2.57 [0.101]
3.91 [0.154]
3.73 [0.147]
12.95 [0.510]
12.45 [0.490]
14.86 [0.585]
14.35 [0.565]
14.86 [0.585]
14.35 [0.565]
6.22 [0.245]
5.72 [0.225]
7.11 [0.280]
6.60 [0.260]
7.11 [0.280]
6.60 [0.260]
D-436-88
D-436-89
D-436-90
Blue
Yellow
Installation Data:
Wire Size Range of Crimp Splice (AWG)
Two wires Three wires
Part
Name
Minimum
Maximum
Minimum
Maximum
D-436-88
D-436-89
D-436-90
26
24
22
24
20
16
28
24
22
24
22
18
=
TITLE:
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
IN-LINE SPLICE SEALING SYSTEM,
MULTI-WIRE SPLICER NICKEL PLATED,
COLOR CODED, WITH INSPECTION SLOTS
DOCUMENT NO.:
Raychem
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
D-436-88/-90
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
REV.:
DATE:
ROUGHNESS IN
MICRON
B1
---
16-Apr-11
0 N/A
CAGE CODE :
REPLACES:
DCR NUMBER:
SCALE:
SIZE:
SHEET:
06090
D060008
D060019
A
1 of 2
Print Date: 9-May-11
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.