Connectors (Inlets/Outlets)
6100-3
https://www.schurter.com /PG07
IEC Appliance Inlet C14, Screw-on Mounting, Front or Rear Side, Solder or Quick-connect Terminal
6100-3 with sealing kit IP54 to appliance
(without locking brackets)
IEC connector C14
Screw-on mounting
Solder/quick connect terminals
6100-3
6100-3 with sealing kit IP54
(including locking brackets)
C14
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Other versions on request
- Types for rivet mounting available upon request
Screw-on mounting front / rear-side
- Types for enhanced glow wire test requirements acc. IEC 60695-2-
12 and -13 for the use in unattended household equipment acc. IEC
60335-1
- Appliance Inlet , Pin temperature 70 °C , Protection class I
- Variants with factory mounted inlet gasket and sealing kit for IP54 into
the equipement and the pluggable power supply
- Solder / Quick Connect
References
Alternative: protection class II version 6102-3; 6102-3
Alternative: version with line filter 5110; 5120
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
10A / 250VAC; 50Hz
15A / 250VAC; 60Hz
> 2kVAC between L-N
> 2kVAC between L/N-PE
(1min/50Hz)
Appliance inlet/-outlet
C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10A, Protection Class I
Allowable Operation Tempe-
rature
-25°C to 70°C
IP-Protection
front side IP40 / IP54 with sealing kit
acc. to IEC 60529
Protection against electric
shock
Suitable for appliances with protection
class I acc. to IEC 61140
Terminal
Solder / Quick Connect
Panel Thickness S
Screw: max 8 mm, max 3 mm with
sealing kit
Mounting screw torque max 0.5Nm
Material: Housing
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6100
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40015595
UL Approvals
UL
UL File Number: E96454
CCC Certificate Number:
CCC Approvals
CCC
1
Connectors