KYOCERA Corporation
11 振動
Vibration
10~500~10 Hz
瞬断 Discontinuity
10μs MAX.
/1.52mm /10G
/DC 100mA
(15min. per each direction,
外観 Appearance
機械的破損、部品のゆるみクラッ
ク等ないこと。
total 12 times)
(3h per direction; XYZ, 9h in total)
IEC 60068-2-6:1995
JIS C 60068-2-6:1999
No damage, loose part or
crack.
接触抵抗 Contact resistance
3mΩ MAX.
12 衝撃
Shock
50 G / 11ms /DC 100mA
(3times per direction; XYZ)
IEC 60068-2-27:1972
瞬断 Discontinuity
10μs MAX.
外観 Appearance
機械的破損、部品のゆるみクラッ
ク等ないこと。
JIS C 60068-2-27:1995
No damage, loose part or
crack.
接触抵抗 Contact resistance
3mΩ MAX.
耐電圧
Dielectric
withstanding voltage
AC 5,000V、 1min.
(Leak 1mA)
JIS C 5402 (5.1):1992
フラッシュオーバー、スパークオーバー
及び絶縁破壊等がないこと。
No flashover, spark over,
dielectric breakdown.
1000MΩ MIN.
9.電気的
Electrical
1
2
3
絶縁抵抗
DC 500V、 1min.
JIS C 5402 (5.2):1992
四端子法にて
Insulation resistance
接触抵抗
Contact resistance
3mΩ MAX.
Four prove method
JIS C 5402(5.3):1992
4
5
温度上昇
Temperature rise
嵌合状態でコンタクトを直列に結線 定格電流にて
Under mating condition,
all contacts shall be connected
Current rating 30K MAX.
serially.
JIS C 5402 (5.10):1992
過負荷試験
Overload test
UL 498 112 に準じ、下記電流を通 接点の著しい損傷のないこと。イン
電した状態で 50 回の挿抜を行う。
In accordance with UL 498 112,
connector shall be mated and
unmated for 50 times with
following current applied.
開放電圧 Open voltage
AC 240V rms
シュレータの焼損のないこと。
There shall be not be any burning
or pitting of the contacts that
would affect the intended
function of device.
There shall not be any burning of
the insulator.
閉回路電流 Closed current
AC 46A rms
力率 Power factor
0.75
SERIES 5090 PRODUCT SPECIFICATION
SPEC No.201-03-884
106-03-004
PAGE 3/8