KYOCERA Corporation
5
6
7
コンタクト装着力
Crimped contact
insertion force
適合するインシュレータに圧着したコ 58.8N MAX. (6.0kgf MAX.)
ンタクトを装着する際の力を測定す
る。試験速度は毎分 25mm
Crimped contacts shall be
inserted in an applicable insulator
at a speed of 25mm/min.
ランス強度
Lance strength
適合するインシュレータに装着された 66.6N MIN. (6.8kgf MIN.)
圧着コンタクトを引き抜く時の力を測
定する。試験速度は毎分 25mm
Contact crimped in an applicable
insulator shall be pulled off at a
speed of 25mm/min.
電線圧着強度
Wire crimp strength
コンタクトを適合するインシュレータに 電線サイズ 強度
圧着した後、電線を引っ張り、圧着 Wire size
Crimp strength
133.4N MIN.
部が破壊する時の力を測定する。
(但し、被覆部は圧着しない)
試験速度は毎分 25mm
18 AWG
16 AWG
14 AWG
12 AWG
10 AWG
(13.61kgf MIN.)
200.0N MIN.
After crimping contacts with
applicable wire, the wire shall be
pulled out a speed of 25mm/min.
The force required to destroy
the crimp area shall be measured.
(20.41kgf MIN.)
221.8N MIN.
(22.63kgf MIN.)
266.6N MIN.
(27.2kgf MIN.)
310.7N MIN.
(31.7kgf MIN.)
F
8
インシュレータロック強度
Insulator lock strength
コンタクトを装着せず、嵌合状態の
インシュレータを引っ張り、インシュレ
ータロックが破壊する強度を測定す
る。
222.5N MIN. (22.7kg MIN.)
Mated insulators without contact
shall be pulled at a speed of
25mm/min.
The force required to destroy the
insulator locking area shall be
measured.
9
パネル保持力
Panel retention force
パネルにインシュレータを装着し、パ 333N MIN. (34kg MIN.)
ネルロック部が外れるまでの強度を
測定する。
After mounting insulators on a
panel, the insulators shall be
extracted .
The force required to destroy
panel locking area shall be
measured.
10 挿抜耐久性
Durability
無通電状態にて
without Current applied
50 times
接触抵抗 Contact resistance
3mΩ MAX.
SERIES 5090 PRODUCT SPECIFICATION
SPEC No.201-03-884
PAGE 2/8
106-03-004