AC SOLID STATE RELAY
Series 602
OPTICALLY ISOLATED 10 A, 250 VAC
Part Number*
602-1W
MilitaryRelay Description
AC Solid State Relay
602-1Y
86031-001
* The Y suffix denotes parameters tested to MIL-R-28750 test methods.
The W suffix denotes parameters tested to Teledyne specifications.
FEATURES
•
Available to DESC drawing 86031-
001 Optical isolation
ELECTRICAL SPECIFICATIONS
•
•
•
•
•
•
Low minimum output current
Extremely low EMI
Zero voltage turn-on
Zero current turn-off
Logic compatible input
(-55°C TO +95°C UNLESS OTHERWISE SPECIFIED)
INPUT (CONTROL) CHARACTERISTICS
Min Typ Max Units
Input Current
(See Figure 1)
VIN = 5 Vdc
VIN=32 Vdc
13
13
15
16
mA dc
Available to Y screening levels of
MIL-R-28750
Turn-Off Voltage (Guaranteed Off)
Turn-On Voltage (Guaranteed On)
Reverse Voltage Protection
Input Voltage Range
1.0 Vdc
Vdc
DESCRIPTION
3.8
3.8
The 602-1 is an AC output solid state
relay designed for power switching. The
relay incorporates a hermetically sealed,
optically coupled solid state relay as a
driver. This driver provides zero voltage
turn-on as well as a logic compatible
control circuit. The relay output is rated
for 10A at 250Vac and switches the load
with a hermetically sealed triac. A built-in
snubber circuit provides reliable
switching of both resistive and reactive
loads with power factors as low as 0.2.
The internal components are potted with
a thermally conductive epoxy, which
provides an environmental seal for
-32 Vdc
32
Vdc
OUTPUT (LOAD) SPECIFICATIONS
Min Typ Max Units
Output Current Rating (See Figure 3)
Output voltage Rating
10 Amps
25
45
250 Vac
440 Hz
1.5 Vrms
Frequency Range
Output Voltage Drop @ 10 Ampere, 25oC
(See Figure 2)
severe environmental conditions
encountered in military and aerospace
applications. The 602-1 is available in W
and Y screening levels. The 602-1Y is
available to DESC drawing 86031-001
Off-State Leakage Current
(250 Vac, 400 Hz)
8.0
mA
Turn-On Time
½
1
Cycle
Cycle
Turn-Off Time
WIRING DIAGRAM
Transient Voltage
+460 V pk
35 Amps
+15 V pk
V/us
+
Overload Current (See Note 3)
Zero Voltage Turn-On Point
+
1
2
3
4
LOAD
CONTROL
SOURCE
AC LINE
~
Off-State dv/dt (See Note 1)
Load Power Factor
200
0.2
109
-
-
Insulation Resistance @ 500 Vdc
Input to Output Capacitance
6/99
Ohms
15
pF
© 1999 TELEDYNE RELAYS