5KP SERIES
Voltage 5V~190V
5000W Peak Power TVS
Elektronische Bauelemente
RoHS Compliant Product
A suffix of “-C” specifies halogen & lead-free
DESCRIPTION
R-6
The 5KP Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
FEATURES
ꢀ
VBR @TJ = VBR@25°C x (1+ αT x (TJ - 25))
(αT:Temperature Coefficient)
Glass passivated chip junction in P600 package
5000W peak pulse capability at 10/1000µs waveform,
repetition rate (duty cycles): 0.01%
C
A
B
A
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Low incremental surge resistance
Typical IR less than 2µA above 12V
High temperature soldering guaranteed: 260°C/40 se conds / 0.375”,
(9.5mm) lead length, 5 lbs., (2.3kg) tension
D
Millimeter
Max.
25.4 REF
REF.
Min.
A
B
C
D
8.6
8.6
1.2
9.1
9.1
1.3
ꢀ
ꢀ
ꢀ
Plastic package has underwriters laboratory flammability classification 94V-O
Matte tin lead–free plated
2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01
Functional Diagram
APPLICATIONS
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
ORDER INFORMATION
Part Number
5KP SERIES
5KP SERIES-C
Type
Lead (Pb)-free
Lead (Pb)-free and Halogen-free
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
Parameter
Symbol
Ratings
5000
8
Unit
W
Peak Power Dissipation with a 10/1000µs waveform
Power Dissipation on infinite heatsink @TL=75°C
PPP
P D
W
Peak forward Surge Current
IFSM
500
A
@8.3ms single half sine-wave unidirectional only 1
Operating and Storage Temperature Range
TJ, TSTG
-55~150
°C
Note:
1. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
http://www.SeCoSGmbH.com/
Any changes of specification will not be informed individually.
24-May-2018 Rev. B
Page 1 of 4