5KP5.0A thru 5KP188A
Vishay General Semiconductor
www.vishay.com
®
TRANSZORB Transient Voltage Suppressors
FEATURES
• P600 glass passivated chip junction
• Available in uni-directional polarity only
• 5000 W peak pulse power capability with
a 10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
P600
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
PRIMARY CHARACTERISTICS
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
VWM
5.0 V to 188 V
6.4 V to 231 V
5000 W
VBR
PPPM
MECHANICAL DATA
PD
8.0 W
Case: Molded epoxy body over passivated junction
IFSM
500 A
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
- RoHS compliant, commercial grade
TJ max.
Polarity
Package
175 °C
Uni-directional
P600
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
LIMIT
5000
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1)
Peak pulse current with a 10/1000 μs waveform (1)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
Peak forward surge current 8.3 ms single half sine-wave (fig. 5)
Instantaneous forward voltage at 100 A (2)
See next table
8.0
A
PD
W
IFSM
600
A
VF
3.5
V
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 175
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Measured 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(2)
Revision: 20-Nov-12
Document Number: 88308
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000