5KP5.0 thru 5KP188A
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
FEATURES
• P600, glass passivated chip junction
• Available in Unidirectional polarity only
• 5000 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
Case Style P600
• Low incremental surge resistance
• Typical I less than 1 µA V
above 10 V rating
(BR)
D
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MAJOR RATINGS AND CHARACTERISTICS
VWM
PPPM
PD
5.0 V to 188 V
5000 W
8.0 W
IFSM
500 A
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Epoxy meets UL 94V-0 flammability rating
Tj max.
175 °C
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
5000
UNIT
W
Peak pulse power dissipation with a 10/1000 µs waveform (1)
Peak pulse current with a 10/1000 µs waveform (1)
Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5)
Peak forward surge current 8.3 ms single half sine-wave (Fig. 5)
Instantaneous forward voltage at 100 A (2)
see next table
8.0
A
PD
W
IFSM
600
A
VF
3.5
V
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 175
°C
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
Document Number 88308
20-Jun-06
www.vishay.com
1