5KP5.0 thru 5KP188A
Vishay Semiconductors
formerly General Semiconductor
®
TRANSZORB Transient Voltage Suppressors
Stand-off Voltage 5.0 to 188 V
Peak Pulse Power 5000 W
Features
• Glass passivated junction
• 5000 W peak pulse power capability with a
10/1000 µs waveform, repetition rate (duty cycle):
0.05 %
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• Devices with V(BR) > 10 V ID are typically less than
Mechanical Data
Case: Molded plastic body over glass passivated
junction. Epoxy meets UL 94V-0 Flammability rating
1.0 µA
• Available in uni-directional polarity only
• Meets MSL level 1 per J-STD-020C
• AEC-Q101 qualified
Terminals: Solder plated or matte tin plated
(E3 Suffix) leads, Solderable per J-STD-002B and
Mil-STD-750, Method 2026
High temperature soldering guaranteed:
265 °C/10 seconds, 0.375" (9.5 mm) lead length,
5 lbs. (2.3 kg) tension
Polarity: The color band denotes the cathode, which
is positive with respect to the anode under normal
TVS operation
Maximum Ratings and Characteristics
Ratings 25 °C, unless otherwise specified
Parameter
Peak pulse power dissipation
Test condition
Symbol
Value
5000
Unit
W
(1)
P
10/1000 µs waveform
10/1000 µs waveform
PPM
(1)
Peak pulse current
I
See next table
8.0
A
PPM
Steady state power dissipation lead lengths 0.375“ (9.5 mm),
P
W
M(AV)
(2)
T = 75 °C
L
(3)
Peak forward surge current
I
600
3.5
A
V
8.3 ms single half sine-wave
FSM
(3)
Instantaneous forward voltage
V
F
100 A
Operating junction and storage
temperature range
T , T
-55 to +175
°C
J
STG
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T = 25 °C per Fig. 2.
A
(2) Mounted on copper pad area of 1.6 x 1.6" (40 x 40 mm) per Fig. 5.
(3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
Document Number 88308
Rev. 1.2, 27-Oct-04
www.vishay.com
1