LM7171QML, LM7171QML-SP
www.ti.com
SNOSAR5C –FEBRUARY 2009–REVISED APRIL 2013
LM7171QML Very High Speed, High Output Current, Voltage Feedback Amplifier
Check for Samples: LM7171QML, LM7171QML-SP
1
FEATURES
DESCRIPTION
The LM7171 is a high speed voltage feedback
amplifier that has the slewing characteristic of a
current feedback amplifier; yet it can be used in all
traditional voltage feedback amplifier configurations.
The LM7171 is stable for gains as low as +2 or −1. It
provides a very high slew rate at 4100V/μs and a
wide unity-gain bandwidth of 200 MHz while
consuming only 6.5 mA of supply current. It is ideal
for video and high speed signal processing
applications such as HDSL and pulse amplifiers. With
100 mA output current, the LM7171 can be used for
video distribution, as a transformer driver or as a
laser diode driver.
23
•
(Typical Unless Otherwise Noted)
Easy-To-Use Voltage Feedback Topology
Very High Slew Rate: 2400V/μs
Wide Unity-Gain Bandwidth: 200 MHz
−3 dB Frequency @ AV = +2: 220 MHz
Low Supply Current: 6.5 mA
•
•
•
•
•
•
•
•
•
High Open Loop Gain: 85 dB
High Output Current: 100 mA
Specified for ±15V and ±5V Operation
Available with Radiation Guarantee
–
–
Total Ionizing Dose 300 Krad(Si)
ELDRS Free 300 Krad(Si)
Operation on ±15V power supplies allows for large
signal swings and provides greater dynamic range
and signal-to-noise ratio. The LM7171 offers low
SFDR and THD, ideal for ADC/DAC systems. In
addition, the LM7171 is specified for ±5V operation
for portable applications.
APPLICATIONS
•
•
•
•
•
•
•
•
HDSL and ADSL Drivers
Multimedia Broadcast Systems
Professional Video Cameras
Video Amplifiers
The LM7171 is built on Texas Instruments's
advanced VIP™ III (Vertically integrated PNP)
complementary bipolar process.
Copiers/Scanners/Fax
HDTV Amplifiers
Pulse Amplifiers and Peak Detectors
CATV/Fiber Optics Signal Processing
Connection Diagram
NC
IN-
NC
IN+
V-
1
2
3
4
5
10
9
NC
V+
8
NC
7
VOUTPUT
NC
6
Figure 1. 8-Pin CDIP Top View
Figure 2. 10-Pin CFP Top View
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
VIP is a trademark of Texas Instruments.
2
3
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2013, Texas Instruments Incorporated