594D
Vishay Sprague
®
www.vishay.com
Solid Tantalum Chip Capacitors, TANTAMOUNT ,
Conformal Coated, Maximum CV, Low ESR
FEATURES
• Large capacitance rating range
• Mounting: Surface mount
• Lowest ESR for a surface mount tantalum chip
Available
Available
capacitor
• Terminations: 100 % tin (2) standard; tin/lead
available
• 8 mm, 12 mm tape and reel packaging available per
EIA 481 and reeling per IEC 60286-3.
7" [178 mm] standard. 13" [330 mm] available.
• Case code compatibility with EIA 535BAAC and
CECC 30801
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Capacitance Tolerance: 10 %, 20 % standard
Voltage Rating: 4 VDC to 50 VDC
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Equivalent Series Resistance: ESR readings measured at
Capacitance Range: 1.0 μF to 1500 μF
100 kHz, + 25 °C from 3500 m to 30 m
ORDERING INFORMATION
594D
477
X0
004
R
2
T
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE
CODE
TERMINATION
REEL SIZE AND
PACKAGING
This is
X0 = 20 ꢀ
X9 = 10 %
This is expressed in V.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
See Ratings
and Case
Code table
2 = 100 ꢀ tin
Tape and reel
expressed in pF.
The first two digits
are the significant
figures. The third
is the number
4 = Gold plated
T = 7" [178 mm] reel
8 = Solder plated W = 13" [330 mm] reel
(60/40)
Special order
of zeros to follow.
Note
•
Preferred tolerances and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
DIMENSIONS in inches [millimeters]
Tantalum wire
nib identifies
anode (+)
terminal
W
L
MAX.
D
REF.
B
J
J
MAX.
MAX.
A
H
CASE CODE
LMAX.
W
H
A
B
DREF.
JMAX.
0.157
[4.0]
0.110 + 0.012/- 0.016
[2.8 + 0.3/- 0.4]
0.075 + 0.012/- 0.024
[1.9 + 0.3/- 0.6]
0.031 0.012
[0.8 0.3]
0.098 0.016
[2.5 0.4]
0.138
[3.5]
0.004
[0.1]
B
0.280
[7.1]
0.295
[7.5]
0.283
[7.2]
0.126 0.012
[3.2 0.3]
0.169 + 0.012/- 0.024
[4.3 + 0.3/- 0.6]
0.236 + 0.012/- 0.024
[6.0 + 0.3/- 0.6]
0.098 0.012
[2.5 0.3]
0.110 0.012
[2.8 0.3]
0.051 0.012
[1.3 0.3]
0.051 0.012
[1.3 0.3]
0.051 0.012
[1.3 0.3]
0.181 0.024
[4.6 0.6]
0.181 0.024
[4.6 0.6]
0.181 0.024
[4.6 0.6]
0.236
[6.0]
0.252
[6.4]
0.244
[6.2]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
C
D
R
0.138 + 0.012/- 0.016
[3.5 + 0.3/- 0.4]
Note
The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]
•
Revision: 25-Jun-13
Document Number: 40006
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000