Datasheet > 58436-3

58436-3

更新时间： 2024-11-09 01:09:35

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
4页	293K
描述
75-Ohm Hex Crimp

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

58436-3 数据手册

Instruction Sheet

75-Ohm Hex Crimp 

Die Assemblies 

58425-[ ] and 58436-[ ]

408-9657

14 OCT 11 Rev E

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use

and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Hand Tool Frame

354940-1

Stationary Jaw

Anvil Die

Die Assemblies 58425-[ ]

and 58436-[ ]

Indenter Die

Moving Jaw

Figure 1

2. DESCRIPTION (Figure 1)

1. INTRODUCTION

This instruction sheet covers the use and maintenance

of Crimping Dies 58425-[ ] and58436-[ ] (in their

various configurations - denoted by the dash number

following the base part number), used in PRO-

CRIMPER III Hand Tool Frame 354940-1. The dies

crimp 75-Ohm Hex Crimp BNC and TNC plug

connectors onto coaxial cable.

Each die assembly consists of an indenter die and an

anvil die. When closed, the dies form either two or

three crimping chambers (depending on type) which

crimp the center contact and ferrule of the connector

onto the coaxial cable. Each die is held in the tool by a

single screw.

3. DIE INSTALLATION

Reasons for reissue of this sheet are provided in

Section 7, REVISION SUMMARY.

1. Close the tool handles until the ratchet releases

and then allow them to open fully.

All dimensions are in millimeters [with inches in

brackets]. Figures and illustrations are for

NOTE

2. See Figure 1 for normal orientation of the dies.

Insert the dies inside the tool jaws and align the

retaining screw holes.

reference only and are not drawn to scale.



3. Thread the retaining screws into the holes and

carefully close the tool handles. Tighten the screws

with the appropriate hex wrench.

*Trademark



This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com

1 of 4

PRODUCT INFORMATION 1-800-522-6752

LOC B

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与58436-3相关器件

型号	品牌	获取价格	描述	数据表
58436-4	TE	获取价格	75-Ohm Hex Crimp
58441-001	AMPHENOL	获取价格	Telecom and Datacom Connector, 16 Contact(s), Male, Solder Terminal, Plug
58441-001LF	FCI-CONNECTOR	获取价格	EYEMAXÂ® 4X HIGH-SPEED SERIAL I/O LINKS
58441-002	AMPHENOL	获取价格	Telecom and Datacom Connector, 16 Contact(s), Male, Solder Terminal, Plug
58441-003LF	AMPHENOL	获取价格	Telecom and Datacom Connector, 16 Contact(s), Male, Solder Terminal, Plug, LEAD FREE
58441-004LF	AMPHENOL	获取价格	Telecom and Datacom Connector, 16 Contact(s), Male, Solder Terminal, Plug, LEAD FREE
58441-103	AMPHENOL	获取价格	Telecom and Datacom Connector, 16 Contact(s), Male, Solder Terminal, Plug
58441-104	AMPHENOL	获取价格	Telecom and Datacom Connector, 16 Contact(s), Male, Solder Terminal, Plug
58441-104LF	AMPHENOL	获取价格	Telecom and Datacom Connector, 16 Contact(s), Male, Solder Terminal, Plug, LEAD FREE
58442-001	AMPHENOL	获取价格	Telecom and Datacom Connector, 48 Contact(s), Male, Surface Mount Terminal, Plug

与58436-3相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

21
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

19
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

44
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

38

产品中心

服务支持

精选活动

关于我们

帮助中心

58436-3

58436-3 数据手册

与58436-3相关器件

与58436-3相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

58436-3

58436-3 数据手册

与58436-3相关器件

与58436-3相关文章

您还可以找

您在本页遇到什么问题？