5.0SMCJ12 thru 5.0SMCJ170A
5000W Transient Voltage Suppressor
FEATURES
5000 W peak pulse power capability with
•
a 10/1000 µs waveform
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Meets MSL level 1, per J-STD-020, LF maximum
Solder dip 275 °C, 10s
•
•
•
•
•
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
•
DO-214AB(SMC)
APPLICATIONS
For use in sensitive electronics protection against voltage transients induced by
lightning or inductive load switching. Key applications include protection of I/O
interfaces, industrial and LED lighting applications, DC power buses, and other
vulnerable circuits used in consumer electronics.
For bi-directional devices, use suffix C or CA (e.g.5.0SMCJ12CA).
Electrical characteristics apply in both directions.
MECHANICAL DATA
Case: DO-214AB (SMC)
Molding compound meets UL 94 V-0 flammability rating
Terminals: Matte tin plated leads, solderable perJ-STD-002 and JESD22-B102
Marking: Laser marking band denotes cathode end or device code; Unidirectional-Device Code
and Cathode Band; Bidirectional-Device Code Only
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Peak pulse power dissipation with a 10/1000 µs waveform (1)
Peak pulse current with a 10/1000 µs waveform (1)
Minimum 5000
W
PPPM
See Next Table
A
IPPM
PM(AV)
8.0
W
A
Steady state power dissipation at TL = 75 °C, lead length 0.375"(9.5mm)
Peak forward surge current 8.3 ms single half sine-wave (2)
Instantaneous forward voltage at 100A (3)
IFSM
500
3.5
V
VF
Operating junction and storage temperature range
- 55 to + 175
°C
TJ, TSTG
Notes:
Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2.
1.
2. Mounted on cooper pad area of 0.8 x 0.8" (20x20mm) Per Fig.5.
3.Measured on 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
1/5