Features
■ RoHS compliant*
■ Recommended for rosin flux and solvent
clean or no clean flux processes
■ Medium profile offers increased power
handling
■ Marking on contrasting background for
permanent identification
■ Wide assortment of pin packages
enhances design flexibility
■ Ammo-pak packaging available
4600M Series - Thick Film Conformal SIPs
Electrical Characteristics
Package Power Temp. Derating Curve
Product Dimensions
6.35
(.250)
Standard Resistance Values
A
MAX.
MAXIMUM
......................10 ohms to 10 megohms
Maximum Operating Voltage..........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 MΩ................ 100 ppmꢀ/C
below 50 Ω...................... 250 ppmꢀ/C
above 2.2 MΩ.................. 250 ppmꢀ/C
TCR Tracking .........................50 ppmꢀ/C
maximum; equal values
Resistor Tolerance ................See circuits
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
3.50
3.00
PIN #1
REF.
MAX. 1.24
2.50
3.43 +.38/ -.508
(.135 +.015/ -.020)
BOTH ENDS (.049)
.508 ± .050
(.020 ± .002)
4614M
TYP.
2.00
4612M
2.54 ± .07
4610M
1.50
(.100 ± .003*)
TYP.
Pin
A Maximum
mm (Inches)
4608M
NON-ACCUM.
Count
4
5
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
4606M
1.00
.50
6
4604M
.............................................200 VRMS
Operating Temperature
.................................-55 /C to +125 /C
2.49
MAX.
(.098)
7
8
9
10
11
12
13
14
0
25
70
AMBIENT TEMPERATURE ( C )
125
Environmental Characteristics
°
.254 ± .050
(.010 ± .002)
TESTS PER MIL-STD-202.........∆R MAX.
Short Time Overload.................. 0.25 ꢁ
Load Life.................................... 1.00 ꢁ
Moisture Resistance .................. 0.50 ꢁ
Resistance to Soldering Heat
................................................ 0.25 ꢁ
Terminal Strength....................... 0.25 ꢁ
Thermal Shock........................... 0.25 ꢁ
TYP.
Package Power Ratings (Watts)
Maximum package length is equal to 2.54mm (.100") times the
number of pins, less .005mm (.002").
Ambient
Temperature
70 /C
Ambient
Temperature
70 /C
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
Pkg.
Pkg.
4604M
4605M
4606M
4607M
4608M
4609M
0.60
0.75
0.90
1.05
1.20
1.35
4610M
4611M
4612M
4613M
4614M
1.50
1.65
1.80
1.95
2.10
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
Physical Characteristics
Flammability .........Conforms to UL94V-0
Body Material........................Epoxy resin
Standard Packaging
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
....................Bulk, Ammo-pak available
Typical Part Marking
Represents total content. Layout may vary.
How To Order
46 06 M - 101 - 222 __ LF
Model
Part Number
4606M-101-RC
4608M-102-RC
Part Number
6M-1-RC
(46 = Conformal SIP)
Number of Pins
Physical Configuration
(M = Thick Film Medium Profile)
8M-2-RC
Electrical Configuration
• 101 = Bussed
• 102 = Isolated
• 104 = Dual Terminator
• AP1 = Bussed Ammo**
• AP2 = Isolated Ammo**
• AP4 = Dual Ammo**
4610M-104-RCꢀRC 10M-4-RCꢀRC
RC = ohmic value, 3-digit resistance code.
Resistance Code
CIRCUIT
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
NUMBER OF PINS
RESISTANCE
CODE
6M-2-222
YYWW
DATE CODE
PIN ONE
INDICATOR
Resistance Tolerance
• Blank = 2 ꢁ (see ꢂResistance Tolerance”
on next page for resistance range)
• F = 1 ꢁ (100 ohms - 5 megohms)
MANUFACTURER'S
TRADEMARK
Terminations
• All electrical configurations EXCEPT 104 & AP4:
LF = SnꢀAgꢀCu-plated (RoHS compliant)
• ONLY electrical configurations 104 & AP4:
L = SnꢀAgꢀCu-plated (RoHS compliant)
Consult factory for other available options.
**Available for packages with 10 pins or less.
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.