Features
■ Recommended for rosin flux and solvent
■ RoHS compliant*
clean or no clean flux processes
■ High profile offers increased power
handling
■ Wide assortment of pin packages
enhances design flexibility
■ Marking on contrasting background for
permanent identification
■ Ammo-pak packaging available
4600H Series - Thick Film Conformal SIPs
Product Characteristics
Package Power Temp. Derating Curve
Product Dimensions
Resistance Range
8.89
(.350)
A
......................10 ohms to 10 megohms
Maximum Operating Voltage..........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 MΩ................ 100 ppmꢀ/C
below 50 Ω...................... 250 ppmꢀ/C
above 2.2 MΩ.................. 250 ppmꢀ/C
TCR Tracking .........................50 ppmꢀ/C
maximum; equal values
Resistor Tolerance ................See circuits
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
MAX.
MAXIMUM
3.50
3.00
4614H
PIN #1
REF.
MAX. 1.24
4612H
2.50
3.43 +.38/ -.508
(.135 +.015/ -.020)
4610H
2.00
BOTH ENDS (.049)
.508 ± .050
(.020 ± .002)
TYP.
4608H
1.50
2.54 ± .07
4606H
(.100 ± .003*)
TYP.
1.00
Pin
Count
A Maximum
mm (Inches)
4604H
NON-ACCUM.
.............................................200 VRMS
Operating Temperature
.................................-55 /C to +125 /C
4
5
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
.50
2.49
(.098)
6
MAX.
7
8
0
25
70
125
Environmental Characteristics
9
°
AMBIENT TEMPERATURE ( C )
10
11
12
13
14
TESTS PER MIL-STD-202........ ∆R MAX.
Short Time Overload.................. 0.25 ꢁ
Load Life.................................... 1.00 ꢁ
Moisture Resistance .................. 0.50 ꢁ
Resistance to Soldering Heat .... 0.25 ꢁ
Terminal Strength....................... 0.25 ꢁ
Thermal Shock........................... 0.25 ꢁ
.254 ± .050
(.010 ± .002)
TYP.
Maximum package length is equal to 2.54mm (.100") times the
number of pins, less .005mm (.002").
Package Power Ratings (Watts)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
Ambient
Temperature
70 /C
Ambient
Temperature
Physical Characteristics
Flammability .........Conforms to UL94V-0
Body Material........................Epoxy resin
Standard Packaging
Pkg.
Pkg.
70 /C
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
4604H
4605H
4606H
4607H
4608H
4609H
0.80
1.00
1.20
1.40
1.60
1.80
4610H
4611H
4612H
4613H
4614H
2.00
2.20
2.40
2.60
2.80
....................Bulk, Ammo-pak available
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
How To Order
46 06 H - 101 - 222 __ LF
Model
(46 = Conformal SIP)
Number of Pins
Typical Part Marking
Represents total content. Layout may vary.
Physical Configuration
(H = Thick Film High Profile)
Electrical Configuration
• 101 = Bussed
Part Number
4606H-101-RC
4608H-102-RC
Part Number
6H-1-RC
• 102 = Isolated
• 104 = Dual Terminator
• AP1 = Bussed Ammo**
• AP2 = Isolated Ammo**
• AP4 = Dual Ammo**
8H-2-RC
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
4610H-104-RCꢀRC 10H-4-RCꢀRC
RC = ohmic value, 3-digit resistance code.
Resistance Tolerance
• Blank = 2 ꢁ (see ꢂResistance Tolerance”
on next page for resistance range)
• F = 1 ꢁ (100 ohms - 5 megohms)
CIRCUIT
NUMBER OF PINS
Terminations
• All electrical configurations EXCEPT 104 & AP4:
LF = SnꢀAgꢀCu-plated (RoHS compliant)
• ONLY electrical configurations 104 & AP4:
L = SnꢀAgꢀCu-plated (RoHS compliant)
RESISTANCE
CODE
6H-2-222
YYWW
DATE CODE
PIN ONE
INDICATOR
MANUFACTURER'S
TRADEMARK
Consult factory for other available options.
**Available for packages with 10 pins or less.
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.