Features
nꢀ Recommendedꢀforꢀrosinꢀfluxꢀandꢀsolventꢀꢀ
cleanꢀorꢀnoꢀcleanꢀfluxꢀprocesses
nꢀ Markingꢀonꢀcontrastingꢀbackgroundꢀforꢀꢀ
permanentꢀidentification
nꢀ RoHSꢀcompliant*
ꢀ
nꢀ Highꢀprofileꢀoffersꢀincreasedꢀpowerꢀꢀ
ꢀ
handling
ꢀ
nꢀ Wideꢀassortmentꢀofꢀpinꢀpackagesꢀenhancesꢀ
designꢀflexibility
nꢀ Ammo-pakꢀpackagingꢀavailable
ꢀ
4600H Series - Thick Film Conformal SIPs
Package Power Temp. Derating Curve
Product Characteristics
Product Dimensions
Resistance Range
8.89
(.350)
A
MAX.
.................... 10 ohms to 10 megohms
Maximum Operating Voltage.........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 megohms.....±100 ppm/°C
below 50 Ω.....................±250 ppm/°C
above 2.2 megohms.......±250 ppm/°C
TCR Tracking.........................50 ppm/°C
maximum; equal values
MAXIMUM
3.50
3.00
4614H
PINꢀ#1
REF.
MAX. 1.24
4612H
4610H
2.50
2.00
1.50
1.00
.50
3.3ꢀ+0.5/-0.3
(.130ꢀ+.020/ꢀ-.012)
BOTHꢀENDS (.049)
0.50ꢀ±ꢀ0.10
(.020ꢀ±ꢀ.004)
TYP.
Resistor Tolerance............... See circuits
Insulation Resistance
4608H
2.54ꢀ±ꢀ.07
................ 10,000 megohms minimum
Dielectric Withstanding Voltage
...........................................200 VRMS
Operating Temperature
(.100ꢀ±ꢀ.003*)
4606H
4604H
TYP.
Pin
A Maximum
NON-ACCUM.
Count mm (Inches)
4
5
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
2.49
(.098)
................................-55 °C to +125 °C
6
MAX.
7
8
Environmental Characteristics
0
25
70
125
9
10
11
12
13
14
ϒ
AMBIENT TEMPERATURE ( C )
TESTS PER MIL-STD-202...... ∆R MAX.
Short Time Overload..................±0.25 %
Load Life....................................±1.00 %
Moisture Resistance..................±0.50 %
Resistance to Soldering Heat
...............................................±0.50 %
Terminal Strength ......................±0.25 %
Thermal Shock ..........................±0.25 %
.254ꢀ±ꢀ.050
(.010ꢀ±ꢀ.002)
TYP.
Package Power Ratings (Watts)
Ambient
Temp.
70 °C
Ambient
Temp.
70 °C
2.00
2.20
2.40
2.60
2.80
Maximumꢀpackageꢀlengthꢀisꢀequalꢀtoꢀꢀ2.54mmꢀ(.100")ꢀtimesꢀtheꢀ
numberꢀofꢀpins,ꢀlessꢀ.005mmꢀ(.002").
Pkg.
Pkg.
4604H
4605H
4606H
4607H
4608H
4609H
0.80
1.00
1.20
1.40
1.60
1.80
4610H
4611H
4612H
4613H
4614H
Governingꢀdimensionsꢀareꢀinꢀmetric.ꢀDimensionsꢀinꢀparenthesesꢀ
areꢀinchesꢀandꢀareꢀapproximate.
Physical Characteristics
*Terminalꢀcenterlineꢀtoꢀcenterlineꢀmeasurementsꢀmadeꢀatꢀpointꢀof
emergenceꢀofꢀtheꢀleadꢀfromꢀtheꢀbody.
Flammability ........ Conforms to UL94V-0
Body Material.......................Epoxy resin
Standard Packaging
For Standard Values Used in
Capacitors, Inductors, and Resistors,
click here.
.................. Bulk, Ammo-pak available
How To Order
Typical Part Marking
Represents total content. Layout may
vary.
46 06 H - 101 - 222 __ LF
Model
(46 = Conformal
SIP)
Number of Pins
Physical Configuration
(H = Thick Film High Profile)
Part Number
Part Number
6H-1-RC
4606H-101-RC
4608H-102-RC
4610H-104-RC/RC
8H-2-RC
10H-4-RC/RC
Electrical Configuration
• 101 = Bussed
RC = ohmic value, 3-digit resistance
code.
• 102 = Isolated
• 104 = Dual Terminator
• AP1 = Bussed Ammo**
• AP2 = Isolated Ammo**
• AP4 = Dual Ammo**
CIRCUIT
NUMBERꢀOFꢀPINS
RESISTANCE
CODE
6H-2-222
YYWW
Resistance Code
DATEꢀCODE
PINꢀONE
INDICATOR
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
MANUFACTURER'S
TRADEMARK
Resistance Tolerance
• Blank = ±2 % (see “Resistance Tolerance”
on next page for resistance range)
• F = ±1 % (100 ohms - 5 megohms)
Terminations
• All electrical configurations EXCEPT 104 & AP4:
LF = Sn/Ag/Cu-plated (RoHS compliant)
• ONLY electrical configurations 104 & AP4:
L = Sn/Ag/Cu-plated (RoHS compliant)
Consult factory for other available options.
**Available for packages with 10 pins or less.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀ
thisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.