447-711
Composite EMI/RFI Banding Backshell
with Strain Relief
and Self-Locking Rotatable Coupling
Slot Option
S - Pigtail Termin. Slot
(Omit for none)
Product Series
Drain Hole Option
(Omit "D" if not required)
Band Option
Band supplied with K
option (Omit for none)
447 - EMI/RFI Non-Environmental
Banding Backshells
TABLE IV: CABLE ENTRY
Finish Symbol
(See Table III)
Connector Designator
A, F, L, H, G and U
A
B
C
D
E
F
Shrink Boot Option
Entry Entry Dia.
Code ±.03 (0.8)
X Dia.
Y Dia.
Shrink boot and
o-ring supplied
with T option
±.03 (0.8)
±.03 (0.8)
Basic Part
Number
Cable Entry
(See Table IV)
04
05
07
09
10
12
13
15
.250 (6.4) .51 (13.0) .875 (22.2)
.310 (7.9) .51 (13.0) .936 (23.8)
.420 (10.7) .51 (13.0) 1.172 (29.8)
.530 (13.5) .63 (16.0) 1.281 (32.5)
.630 (16.0) .63 (16.0) 1.406 (35.7)
.750 (19.1) .63 (16.0) 1.500 (38.1)
.810 (20.6) .63 (16.0) 1.562 (39.7)
.940 (23.9) .63 (16.0) 1.687 (42.8)
(Omit for none)
447 H S 711 XW 19 13 D S K P T S
Angle and Profile
- Straight
W - 90° Elbow
Shield
Termination Slot
(Omit for none)
Polysulfide Strips
Termination area
free of cadmium,
XW finish only
Connector Shell Size
S
(See Table II)
16 1.00 (25.4) .63 (16.0) 1.812 (46.0)
19 1.16 (29.5) .63 (16.0) 1.912 (48.6)
(Omit for none)
NOTE: Coupling Nut Supplied Unplated
F
1.28
X
Dia
(32.5)
E
.67
(17.0)
Typ.
Anti-Decoupling
Device
Anti-Decoupling
Device
Entry
Diameter
Y
G
Drain Holes
(Optional)
Shield
Shrink Sleeve or Boot
Groove, Typ.
Termination
Slot- Typ.
(Optional)
Raised Configuration
(Mfr's Option)
TABLE II: CONNECTOR SHELL SIZE
TABLE III: FINISH
Shell Size For
Connector Designator*
Symbol
Finish Description
E
F
G
Max Entry
2000 Hour Corrosion
Resistant Electroless
Nickel
A F/L H
08 08 09
10 10 11
G
–
–
U
–
08
± .06 (1.5) ± .09 (2.3) ± .09 (2.3) Dash No.**
XM
.69 (17.5)
.88 (22.4) 1.36 (34.5)
04
05
07
09
11
13
15
17
20
.75 (19.1) 1.00 (25.4) 1.42 (36.1)
.81 (20.6) 1.13 (28.7) 1.48 (37.6)
.88 (22.4) 1.31 (33.3) 1.55 (39.4)
.94 (23.9) 1.38 (35.1) 1.61 (40.9)
.97 (24.6) 1.44 (36.6) 1.64 (41.7)
1.06 (26.9) 1.63 (41.4) 1.73 (43.9)
1.13 (28.7) 1.75 (44.5) 1.80 (45.7)
1.19 (30.2) 1.88 (47.8) 1.86 (47.2)
12 12 13 11 10
14 14 15 13 12
16 16 17 15 14
18 18 19 17 16
20 20 21 19 18
2000 Hour Corrosion
Resistant Ni-PTFE,
Nickel-Fluorocarbon
Polymer. 1000 Hour
GreyTM
XMT
22 22 23
–
20
2000 Hour Corrosion
Resistant Cadmium/
Olive Drab over
24 24 25 23 22
XW
**Consult factory for additional entry sizes available.
Consult factory for O-Ring to be supplied with part less shrink boot.
Electroless Nickel
G
© 2009 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
A-87