Series 43000
How to Order 43 X X X X XX X
MOLDING DESIGN ]
[ SPECIALS OR
0 = Surface Mount w/ Mounting Ends
1 = Surface Mount w/o Mounting Ends
2 = Insulated Feed Thru w/ Mounting Ends
3 = Insulated Feed Thru w/o Mounting Ends
OPTIONAL DESIGNS
0 = None
A-= = Custom Con¿guration
[ NUMBER OF POSITIONS
Available 1 thru 26 W/Mounting End
1 thru 28 w/o Mounting Ends
INSERT OR BOTTOM
TERMINATION DESIGN ]
0 = Surface Mount, No Bottom Termination
1 = Printed Circuit Pin
2 = Turret Type Solder Terminal
3 = Quick Connect .110"
4 = Quick Connect .187"
5 = Quick Connect .250"
[ HARDWARE OR TOP
TERMINATION DESIGN
0 = Standard Zinc Plated Steel Screw,
Combo Head
1 = Wire Clamp Screw
2 = Nickel Plated Brass Screw
3 = Stainless Steel Screw
5 = Without Screws
6 = Quick Connects, Screw Type*
8 = Captivated Screw
6 = Extended Printed Circuit Pin or Wire Wrap
7 = Right Angle Printed Circuit Pin
Note: Option 4 & 5 Only Available on Surface Mount
Style Molding
INSERT/SCREW DIMENSION ]
0 = 6-32 Insert and Screw
*See accessories
1 = 8-32 Insert and Screw, available on PC Pin,
Turret Type Solder Pins, Wire Wrap and Right
Angle Versions only
Series 43000 Accessories
TERMINAL BLOCK JUMPERS
WIRE CLAMP
4300 – Plated brass “Rooster comb” design Type 267A42
permits connections of two to 18 poles.
4300 – Wire clamp captivated to No. 6-32 or 8-32 screw
eliminates need for lugs. Accepts up to No. 12AWG wire. May
be ordered factory installed or loose.
To order, specify; Part No. 267A42-_ _ .
MARKING STRIPS
4300 – Pre-punched black ¿ber . . . mounts under block. May
be imprinted to customer speci¿cations.
To order, specify: Part No. 267A19-1 thru 26 (with mounting
hole); Part No. 267A218-1 thru 28 (less mounting hole).
COVERS
43000 – Rigid .030” thick self-extinguishing vinyl. Black
matte-¿nished on both sides. May double as marking strip
when imprinted with white ink. Complete with spring clips for
attaching to mounting positions.
Part No. 0196_ _ 000, 1 thru 26 poles.
Example: 019605000 would be a 5 pole cover
Part No.
.605 to .645
(15,36) to(16,38)
TN-375
TINNERMAN NUT
For Long
Feed
4300 – for special mounting of terminal blocks
less mounting position.
Part No. TN-375.
Through
.065
(1,65)
.035
.448
(11,37)
.428
(0,88)
(10,85)
Speci¿cations subMect to change.
Dimensions are shown for
reference purposes only.
22
www.curtisind.com
Curtis Industries
A Division of Powers Holdings, Inc.