Features
■ Marking on contrasting background for
permanent identification
■ RoHS compliant* (see How to Order
“Termination” option)
■ Now available with improved tolerance
to 0ꢀ. ꢁ
■ Low profile provides compatibility with
DIPs
■ Compatible with automatic insertion
equipment
■ Superior package integrity
4300R Series - Thick Film Molded SIPs
Product Characteristics
Package Power Temp. Derating Curve
Product Dimensions
Resistance Range
27.53
MAX.
......................10 ohms to 10 megohms
Maximum Operating Voltage..........100 V
Temperature Coefficient of Resistance
50 ohms to 2.2 megohms.. 100 ppmꢀ/C
below 50 ohms................ 250 ppmꢀ/C
above 2.2 megohms........ 250 ppmꢀ/C
TCR Tracking .........................50 ppmꢀ/C
maximum; equal values
(1.084)
24.99
MAX.
3.50
3.00
2.50
2.00
(.984)
22.45
(.884)
14.83
(.584)
MAX.
MAX.
19.92
(.784)
PIN #1 REF.
4.95
(.195)
MAX.
MAX.
.407 + .102/ - .000
(.016 + .004/ - 000)
3.43 + .38/ - .25
(.135 + .015/ - .010)
1.02 ± .12
(.040 ± .005)
.483 ± .050
(.020 ± .002)
Resistor Tolerance ................See circuits
Operating Temperature
.................................-55 /C to +125 /C
Power Rating ....................Derate to zero
power from + 70 /C to + 125 /C
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
.............................................200 VRMS
Lead Solderability
1.50
4311R
4310R
4309R
1.00
TYP.
4308R
4306R
2.54 ± .07
(.100 ± .003*)
.50
TYP.
NON-ACCUM.
0
25
70
AMBIENT TEMPERATURE ( C )
125
2.16 ± .10
(.085 ± .004)
°
.....Meet requirements of MIL-STD-202
Method 208
Package Power Rating at 70 /C
4306R......................................0.75 watts
4308R......................................1.00 watts
4309R......................................1.13 watts
4310R......................................1.25 watts
4311R......................................1.38 watts
Environmental Characteristics
1.02 ± .05
(.0425 ± .002)
TESTS PER MIL-STD-202.........∆R MAX.
Short Time Overload.................. 0.25 ꢁ
Load Life.................................... 1.00 ꢁ
Moisture Resistance .................. 0.50 ꢁ
Resistance to Soldering Heat
................................................ 0.25 ꢁ
Terminal Strength....................... 0.25 ꢁ
Thermal Shock........................... 0.25 ꢁ
.254 ± .050
(.010 ± .002)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
Typical Part Marking
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
Represents total content. Layout may vary.
Physical Characteristics
Flammability .........Conforms to UL94V-0
Lead Frame Material
..........................Copper, solder coated
Body Material ..................Novolac epoxy
CIRCUIT
RESISTANCE
CODE
PART
NUMBER
4306R-101-
222
YYWW
DATE CODE
PIN ONE
INDICATOR
MANUFACTURER'S
TRADEMARK
How To Order
43 06 R - 101 - 222 __ __
Model
(43 = Molded SIP)
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
Number of Pins
Physical Config.
(R = Thick Film Low Profile)
Electrical Configuration
• 101 = Bussed
• 102 = Isolated
• 104 = Dual Terminator
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
Resistance Tolerance
• Blank = 2 ꢁ (see ꢂResistance Tolerance”
on next page for resistance range)
• F = 1 ꢁ (100 ohms - 1 megohm)
• D = 0.5 ꢁ (100 ohms - 1 megohm)
Terminations
• All electrical configurations EXCEPT 104:
LF = Tin-plated (RoHS compliant version)
• ONLY electrical configuration 104:
L = Tin-plated (RoHS compliant version)
• Blank = TinꢀLead-plated
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Consult factory for other available options.