Space Applications Only
PHR
Vishay Sfernice
www.vishay.com
DIMENSIONS in millimeters
A
D
D
B
C
E
E
DIMENSIONS
B
VARIANT
NUMBER
STYLE
A
C
D/E
MIN.
1.368
1.758
2.908
4.898
0.848
MAX.
1.672
2.062
3.212
5.232
1.152
MIN.
0.723
1.143
1.473
2.413
0.473
MAX.
0.977
1.397
1.727
2.667
0.727
MIN.
0.373
0.373
0.373
0.373
0.373
MAX.
0.627
0.627
0.627
0.627
0.627
MIN.
0.25
0.25
0.27
0.35
0.15
MAX.
0.51
0.51
0.53
0.61
0.35
01, 05
02, 06
03, 07
04, 08
13, 14
0603
0805
1206
2010
0402
NOTION OF SINGLE LOT
The homogeneity of lots is given by the front end lot numbers (primary process lot) and not by the date code.
The date code is applied after completion of end of production testing. Parts coming from different lots might have same date
code. A customer who needs lot homogeneity should mention on his order: SINGLE PRODUCTION LOT
END OF PRODUCTION TESTING
Mandatory testing performed at the end of the production process:
• 100 % overload: Voltage 6.25 Pn x Rn or 2 UL whichever is less - duration 2 s
• 100 % burn in: 168 h at Pn at 70 °C
OPTIONS
LOT VALIDATION TESTING
For procurement of qualified components, lot validation testing is not required and shall only be performed if specifically
stipulated in the purchase order.
For procurement of unqualified components, lot validation testing shall be performed as stipulated in the purchase order. The
need for lot validation testing shall be determined by the orderer.
When lot validation testing is required, it shall consist of the performance of one or more of the tests or subgroup test sequences
of chart F4 indicated in the ESA Generic Specification ESCC 4001. The testing to be performed and the sample size shall be as
stipulated in the purchase order. When procurement of more than one component type is involved from a family, range or series,
the selection of representative samples shall also be stipulated in the purchase order.
Lot validation testing will be composed of one LVT charges and LVT samples:
• Lot validation test charges has to be ordered separately on purchase order.
• Lot validation samples have to be ordered separately on purchase orderer.
FINAL INSPECTION
If requested by the orderer a final inspection can be performed on site.
Final inspection has to be stipulated separately on purchase order.
LAND PATTERN in millimeters
Gmin.
X
Zmax.
CHIP SIZE
0402
Zmax.
1.55
2.37
2.76
3.91
5.93
Gmin.
0.15
0.35
0.74
1.85
3.71
Xmax.
0.73
0.98
1.40
1.73
2.67
0603
0705/0805
1206
2010
Note
Suggested land pattern: According to IPC-7351A
•
Revision: 26-Mar-14
Document Number: 53037
2
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000