Datasheet > 4-655621-7

4-655621-7

更新时间： 2024-11-12 23:27:23

品牌	Logo	应用领域
泰科 - TE		分离技术隔离技术连接器连接器支架
页数	文件大小	规格书
8页	699K
描述
ISOLATIONSCRIMPER

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

4-655621-7 技术参数

生命周期：	Active	Reach Compliance Code：	unknown
风险等级：	5.58	连接器支架类型：	TOOL AND MACHINERY
Base Number Matches：	1

4-655621-7 数据手册

Crimp Tooling —

Where Form Meets Function

Quality, cost, and throughput are key attributes for any production process. The

crimp termination process is no exception. Many variables contribute to the results.

Crimp tooling, defined here as crimpers and anvils, is one of those variables.

This paper will focus on defining key characteristics of crimp tooling and the effects

those characteristics may have on the production process.

Introduction

Quality, cost, and throughput are associated with specific measurements and linked to process variables. Crimp

height, pull test values, leads per hour, and crimp symmetry are some of the measures used to monitor production

termination processes.

Many variables affect the process such as wire and terminal quality, machine repeatability, setup parameters, and

operator skill.

Crimp tooling is a significant contributor to the overall crimp termination process. The condition of crimp tooling is

constantly monitored in production by various means. These means are often indirect measures. Crimp Quality

Monitors and crimp cross sections are methodologies that infer the condition of the crimp tooling. Visual inspec-

tion of the crimp tooling can be used

to check for gross failures such as tool breakage or tooling deformation which occurred as a result of a machine

crash. Continuous monitoring of production will help determine when

the process needs to be adjusted and the replacement of crimp tooling can be one of the adjustments that is

made.

Crimp tooling can a have positive effect on the quality, cost, and throughput of the termination process. High qual-

ity crimp tooling can produce high quality crimps with less in-process variation over a greater number of termina-

tions.

It is difficult to distinguish critical tooling attributes with visual inspection only. Some attributes cannot be in-

spected even by running crimp samples. This paper will present the reader with information that identifies key

crimp tooling attributes and the effect of those attributes on the crimping process.

Key Crimp Tooling Characteristics

There are four major categories of key characteristics for crimp tooling. These are:

• Geometry and associated tolerances

• Materials

• Surface condition

• Surface treatment

Each of these categories contributes to the overall performance of the production termination process.

tooling.te.com

12 3 4 5 6 7 8

中文翻译

下载PDF

与4-655621-7相关器件

型号	品牌	获取价格	描述	数据表
4-655621-8	TE	获取价格	ISOLATIONSCRIMPER
46556-2345	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY Slim Plug, 80 Circuits, 3.50mm (.137") Unmat
46556-2345	MOLEXKITS	获取价格	High Density Mezz Interconnect Plug and Receptacle
46556-2347	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY
46556-2545	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY Slim Plug, 80 Circuits, 4.50mm (.196") Unmat
46556-2547	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY Slim Plug, 80 Circuits, 4.50mm (.196") Unmat
46556-2745	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY Slim Plug, 80 Circuits, 7.00mm (.275") Unmat
46556-2747	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY
46556-3145	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY
46556-3245	MOLEX	获取价格	1.27mm (.050") by 1.27mm (.050") Pitch SEARAY

与4-655621-7相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

23
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

8
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

9
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

32

产品中心

服务支持

精选活动

关于我们

帮助中心

4-655621-7

4-655621-7 技术参数

4-655621-7 数据手册

与4-655621-7相关器件

与4-655621-7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

4-655621-7

4-655621-7 技术参数

4-655621-7 数据手册

与4-655621-7相关器件

与4-655621-7相关文章

您还可以找

您在本页遇到什么问题？