Datasheet > 4-21010-1

4-21010-1

更新时间： 2024-11-03 01:16:51

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
4页	132K
描述
Hydraulic Crimping

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

4-21010-1 数据手册

Instruction Sheet

Hydraulic Crimping

Head 1752877-1

408-8956

09 MAR 10 Rev B

2. DESCRIPTION

Latch Pin

Yoke

Main components of the crimping head are: a yoke

which houses the stationary die and retains the

terminal assembly for crimping, a removable latch pin

which allows pivoting of the yoke on the pivot pin

(typically required for splice terminations), a cylinder

which contains the head’s hydraulic chamber, a piston

(ram) which holds and controls the moving die, and a

quick connect/disconnect coupler which mates with

the coupler on the hose to release or supply pressure.

Pivot Pin

To avoid injury when using hydraulic crimping

equipment, observe the following precautions:

- Do NOT modify the crimping equipment in any

way.

- Use only dies, terminals, and wire specified for

the head.

DANGER

Male

Quick-Disconnect

Coupler

- Do NOT perform repairs other than those

specified in the instructional material supplied

with the equipment.

Dust Cap

Figure 1

3. CRIMPING HEAD INSTALLATION

Each crimping head is shipped with a coating of

lubricating oil to prevent rust and corrosion. Wipe the

oil off before installing the crimping head on the power

unit. Note that the crimping head is shipped without

oil inside the cylinder. To install crimping head,

proceed as follows:

1. INTRODUCTION

This instruction sheet provides application, inspection,

and maintenance procedures for Crimping Head

1752877--1. (see Figure 1). This crimping head uses

interchangeable crimping dies and is used to crimp

products listed in Figure 2. The instructions include

general information for the insertion of dies and the

crimping procedure. Refer to instructions packaged

with specific die sets for compatible products, wire

ranges, strip dimensions, and application procedures.

Make sure that hydraulic pressure to the hose is

released and that power supply is disconnected

to electric power unit, if applicable.

DANGER

1. Remove protective dust caps from both quick

connect/disconnect couplers.

Dimensions on this sheet are in millimeters [with

inches in brackets]. Figures and illustrations are

for reference only and are not drawn to scale.

NOTE

2. Thoroughly clean coupling area of hose

assembly and crimping head. See Figure 1.

PRODUCTS CRIMPED

CORRESPONDING DIE SET INSTRUCTION SHEET

AMPLI-BOND* and PLASTI-GRIP* Terminals, 8-4/0 AWG

TERMINYL* Terminals and Splices, 1/0-4/0 AWG

408-1724

408-1729

408-1936

408-2281

Pre-Insulated AMPOWER* Terminals, 1/0 AWG

Pre-Insulated Nylon Heavy Duty Terminals, 8-1/0 AWG

COPALUM* Sealed Terminals and Splices, Aluminum 8-1/0; Copper 10-2

Figure 2

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

E2010 Tyco Electronics Corporation, Berwyn, PA

1 of 4

TE logo and Tyco Electronics are trademarks.

LOC B

*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与4-21010-1相关器件

型号	品牌	获取价格	描述	数据表
4-21012-0	MACOM	获取价格	Hydraulic Crimping
42-10162	CONEC	获取价格	Cable Assembly
42-10170	CONEC	获取价格	Cable Assembly
42-10171	CONEC	获取价格	Cable Assembly
4210-21	PSEMI	获取价格	SPDT UltraCMOS? RF Switch DC - 3000 MHz
4210-22	PSEMI	获取价格	SPDT UltraCMOS? RF Switch DC - 3000 MHz
4--21028--4	MACOM	获取价格	Pneumatic CERTI-CRIMP Tool Holder
4-21028-4	MACOM	获取价格	Micro Pneumatic Tooling
4--21028--9	MACOM	获取价格	Pneumatic CERTI-CRIMP Tool Holder
4-21028-9	MACOM	获取价格	Micro Pneumatic Tooling

与4-21010-1相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

6
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

3
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

23
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

24

产品中心

服务支持

精选活动

关于我们

帮助中心

4-21010-1

4-21010-1 数据手册

与4-21010-1相关器件

与4-21010-1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

4-21010-1

4-21010-1 数据手册

与4-21010-1相关器件

与4-21010-1相关文章

您还可以找

您在本页遇到什么问题？