19013 36th Ave. West Suite H Lynnwood, WA 98036, USA
VC1 VCXO Series
Full Size or Half Size Metal Thru-Hole Voltage Controlled Xtal Oscillator
CMOS/ TTL Compatible
–
2.00 MHz 60.00 MHz
Standard Specifications
Model
VC13 & VC15
2.00 to 20.00 MHz 2.00 to 20.00 MHz
± 25, 50, 100 PPM ± 15 PPM only
VC14 & VC16
Frequency Range
Overall Frequency Stability
20.001 to 60.00 MHz
± 15, 25, 50, 100 PPM over OTR
-
°
Operating Temperature Range (OTR) 0 to +70 C is standard, but can be extended to 40 to +85°C for certain frequencies
Supply Voltage (Vcc)
Output Load
Control Voltage Range (CVR)
Pullablity over CVR
Linearity
5.0 volts and 3.3 volts available
Standard load is 15pF maximum, see Test Circuit 7 (consult factory for heavier loads)
0.5 to 4.5 volts for 5.0 volt Supply; 0.3 to 3.0 volts for 3.3 volt Supply
± 25, 50, 100, 150, 200 PPM. Consult factory for ± 300 PPM.
± 10% (Consult factory for ± 5%)
Frequency Range
(MHz)
Supply Current
Icc (mA)
Rise and Fall Time
Tr & Tf (nS)
Typical
Maximum
Typical
3.5
3.0
3.0
2.5
Maximum
5.0
–
2.000 20.000
10
20
25
30
15
25
30
35
–
20.001 30.000
4.5
4.0
3.5
–
30.001 50.000
–
50.001 60.000
Part Numbering Guide
3 VC14H 100 A Z - 60.0M
Packaging
Tube or
on Pads
Supply Voltage
Blank= 5.0 volts ±5%
3= 3.3 volts ±5%
Frequency in MHz
Model
VC13=Full Size, 5.08mm
VC14=Full Size, 8.0mm
VC15=Half Size, 6.0mm
VC16=Half Size, 7.5mm
Frequency Deviation (Pullability) over CVR
T: ± 25 PPM
V: ± 50 PPM
W: ± 100 PPM
X: ± 150 PPM
Y: ± 200 PPM
Z: ± 300 PPM
Frequency Stability
Operating Temperature Range
15: ± 15 PPM
(N/a for VC13, 15)
A: 0 to +50°C
B: 0 to +70°C
C: -10 to +70°C
D: -20 to +75°C
E: -30 to +75°C
F: -40 to +85°C
25: ± 25 PPM
50: ± 50 PPM
100: ± 100 PPM
N/a for 2.0 to 20.0 MHz (VC14, 16)
Use VC13, 15 for 2.0 to 20.0 MHz
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
inches (mm)
Mechanical:
not to scale
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
VC15: .236 (6.0)
VC16: .295 (7.5) MAX
VC13: .200 (5.08)
VC14: .315 (8.0) MAX
VC13 & VC14
.600 (15.24)
VC15 & VC16
.300 (7.62)
OUT
.031 (0.8)
.031 (0.8)
Vcc
Vcc
OUT
5
8
8
14
.020
(.51)
.020
(.51)
4
1
7
1
GND
Vcon
GND
Vcon
.250 (6.35) MAX
.250 (6.35) MAX
.807 (20.5) MAX
.492 (12.5) MAX
Jan 2002
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
24
Pl tronics, Inc.