Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
TV5 TCVCXO Series
Surface Mount Temp. Compensated Voltage Controlled Xtal Oscillator with or without Trimmer
Clipped Sine Wave Compatible
–
10.00 MHz 60.00 MHz
Standard Specifications
°
0 to +50 C to -40 to +85°C available
Operating Temperature Range
vs. Temp
vs. Vcc
Aging
± 1.5 to ± 15 PPM over Operating Temperature Range available
± 0.5 PPM maximum over Vcc ± 5%
± 3 PPM first year, ± 1 PPM per year thereafter at 25°C ± 5%
± 3 PPM minimum
5.0 volts and 3.3 volts available
1 volt p-p minimum
Overall Frequency
Stability
Frequency Adj by Trimmer
Supply Voltage (Vcc)
Output Voltage Levels
Supply Current (Icc)
Output Load (see Test Circuit 7)
Control Voltage Range (CVR)
Pullablity over CVR
2 to 5 mA max
10 K / 10 pF
0.5 to 4.5 volts for 5.0 volt Supply; 0.0 to 3.3 volts for 3.3 volt Supply
± 5, 10, 15 PPM. Consult factory for ± 25 PPM.
± 10% (Consult factory for ± 5%)
Linearity
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
Consult factory for
available frequencies
and specs. Not all
options available
for all frequencies.
A special p/n may
be assigned.
3TV5
1
C 100
A
S - 10.0M - XXX (Internal Code or blank)
Model / Supply Voltage
TV5= 5.0 volts ±5%
3TV5= 3.3 volts ±5%
Frequency in MHz
Frequency Deviation (Pullability) over CVR
S: ± 5 PPM
R: ± 10 PPM
Q: ± 15 PPM
T: ± 25 PPM
TCVCXO Package
1=11.4x9.6x2mm, w/o trimmer
8=11.4x9.6x2mm, with trimmer
9=9x7x2mm, w/o trimmer
Operating Temperature Range {Tightest FS available}
Frequency Stability
is inclusive of
frequency shifts due
to calibration,
temperature, supply
voltage, shock,
vibration and load
A: 0 to +50°C {±1.5 PPM }
B: 0 to +70°C {±1.5 PPM }
C: -10 to +70°C {± 2.0 PPM }
D: -20 to +75°C {± 2.0 PPM }
E: -30 to +75°C {± 2.5 PPM }
F: -40 to +85°C {± 5.0 PPM }
Logic
Frequency Stability (FS)
C: Clipped Sine Wave
015: ± 1.5 PPM 030: ± 3.0 PPM
020: ± 2.0 PPM 050: ± 5.0 PPM
025: ± 2.5 PPM 100: ± 10.0 PPM
150: ± 15.0 PPM
inches (mm)
Mechanical:
not to scale
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
.449 (11.4)
.354 (9.0)
Trimmer on Package 8 only, location may vary
Package 9
Package 1 & 8
Packaging
Bulk or
24mm tape
12mm pitch
Packaging
Bulk or
16mm tape
12mm pitch
Solder Pads
.079 (2.0)
.079 (2.0)
.260 (6.6)
Solder Pads
For Best Performance,
Do NOT allow any traces other
than ground under oscillators
.13 (3.3)
1
2
4
3
2
Vcon GND
(Even in buried layers)
Vcon
GND
4
3
2
1
2
3
Vcc
OUT
4
4
3
.06 (1.6)
1
Vcc
OUT
.06 (1.6)
1
.07 (1.8)
.300 (7.62)
Jan 2004
.200 (5.08)
.04 (1.0)
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
29
Pl tronics, Inc.