19013 36th Ave. West Suite H Lynnwood, WA 98036, USA
TV4 TCVCXO Series
Surface Mount or Full Size Metal Thru-Hole Temp. Compensated Voltage Controlled Xtal Oscillator
HCMOS, Clipped Sine Wave or Sine Wave Compatible
–
10.00 MHz 60.00 MHz
Standard Specifications
°
0 to +50 C to -40 to +85°C available
Operating Temperature Range
vs. Temp
vs. Vcc
Aging
± 1.0 to ± 15 PPM over Operating Temperature Range available
± 0.5 PPM maximum over 5.0 volts ± 5%
± 3 PPM first year, ± 1 PPM per year thereafter at 25°C ± 5%
± 3 PPM minimum
Overall Frequency
Stability
Frequency Adj by Trimmer
Supply Voltage (Vcc)
5.0 volts and 3.3 volts available
Output Logic
HCMOS
Clipped Sine Wave
Sine Wave
Logic “1” 4.5 volts min
Output Voltage Levels
1 volt p-p minimum
Logic “0” 0.5 volts max
20 to 40 mA max
10 TTL Loads + 15pF
0.5 to 4.5 volts for 5.0 volt Supply; 0.33 to 2.97 volts for 3.3 volt Supply
± 5, 10, 15 PPM. Consult factory for ± 25 PPM.
± 10% (Consult factory for ± 5%)
Consult Factory
Supply Current (Icc)
Output Load (see Test Circuit 7)
Control Voltage Range (CVR)
Pullablity over CVR
2 to 5 mA max
10 K / 10 pF
Linearity
On Test Circuit for Clipped Sine Wave only: Add a 20 K resistor from output to ground
Part Numbering Guide
3TV4
6
H 100
A
Z - 60.0M
Consult factory for
available frequencies
and specs. Not all
options available
for all frequencies.
A special p/n may
be assigned.
Model / Supply Voltage
TV4= 5.0 volts ±5%
3TV4= 3.3 volts ±5%
Frequency in MHz
Frequency Deviation (Pullability) over CVR
S: ± 5 PPM
R: ± 10 PPM
Q: ± 15 PPM
T: ± 25 PPM
TCVCXO Package, Max Height
Operating Temperature Range {Tightest FS available}
6=Thru-Hole, 5.0mm
Frequency Stability
is inclusive of
frequency shifts due
to calibration,
temperature, supply
voltage, shock,
vibration and load
7=Surface Mount, 5.5mm
8=Surface Mount, 4.0mm
9=Thru-Hole, 8.5mm
A: 0 to +50°C {±1.0 PPM }
B: 0 to +70°C {±1.5 PPM }
C: -10 to +70°C {± 2.0 PPM }
D: -20 to +75°C {± 2.0 PPM }
E: -30 to +75°C {± 2.5 PPM }
F: -40 to +85°C {± 5.0 PPM }
Logic
Frequency Stability (FS)
C: Clipped Sine Wave
H: HCMOS
S: Sine Wave
010: ± 1.0 PPM 025: ± 2.5 PPM 100: ± 10.0 PPM
015: ± 1.5 PPM 030: ± 3.0 PPM 150: ± 15.0 PPM
020: ± 2.0 PPM 050: ± 5.0 PPM
inches (mm)
Mechanical:
not to scale
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Package 9
Package 6
Package 8
Package 7
.157 (4.0)
MAX
.197 (5.0)
MAX
.335 (8.5)
MAX
.217 (5.5)
MAX
.457 (11.6)
.386 (9.8)
.193 (4.9)
MIN
.600 (15.24)
.157 (4.0)
MIN
Tab
.04 x .10
(1.0 x 2.5)
1
7
Vcon
GND
Vcc
Vcon
GND
GND
.300 (7.62)
.600 (15.24)
Vcc
14
OUT
8
OUT
GND
1
7
1
2
3
Vcon GND
OUT Vcon
Vcc
.740 (18.8) MAX
.858 (21.8) MAX
0.375 (9.4)
Vcc
14
OUT
GND
5
GND
4
.100
(2.54)
TYP
8
.17
(4.3)
.748 (19.0) MAX
.055
(1.4)
.600 (15.24)
.799 (20.3)
.04 x .20
(1.0 x 5.08)
.12 (3.0)
.66 (16.76)
Jan 2002
.110 (2.8)
Trimmer hole locations may vary
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
29
Pl tronics, Inc.