3000W Transient Voltage Suppressor
3KP-HF Series
Stand-off Voltage: 5.0 ~ 440V
Power Dissipation: 3000 Watts
RoHS Device
Halogen Free
R-6
Features
-Glass passivated chip.
0.052(1.32)
0.048(1.22)
DIA.
1.0(25.4)
MIN.
-Low leakage.
-Uni and Bidirection unit.
-Excellent clamping capability.
-Very Fast response time.
0.360(9.14)
0.340(8.64)
Mechanical Data
0.360(9.14)
0.340(8.64)
DIA.
-Case: Molded plastic R-6
-Epoxy: UL 94V-0 rate flame retardant.
1.0(25.4)
MIN.
-Lead: Solderable per MIL-STD-202, method
208 guranteed.
-Polarity: Color band denotes cathode end
except Bipolar.
Dimensions in inches and (millimeter)
-Weight: 2.1 grams
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive loaded.
For capacitive load, derated current by 20%.
Symbol
Parameter
Value
Unit
Peak power dissipation with a 10/1000 μs waveform
(Note 1)
PPP
3000
W
Peak pulse current wih a 10/1000 μs waveform
IPP
PD
See Next Table
6.5
A
(Note 1)
Power dissipation on infinite heatsink at TL=75°C
W
Peak forward surge current, 8.3mS single
half sine-wave unidirectional only
(Note 2)
IFSM
300
A
Maximum instantaneous forward voltage at
100A for unidirectional only (Note 3)
VF
3.5 / 5.0
V
Operating junction and storage temperature range
NTOES:
TJ, TSTG
-55 to +150
°C
(1) Non-repetitive current pulse, per fig.3 and derated above TA=25°C per Fig. 1.
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
Company reserves the right to improve product design , functions and reliability without notice.
REV:A
Page 1
QW-JTV13