DATA SHEET
3KP5.0~3KP220CA
GLASSPASSIVATEDJUNCTIONTRANSIENTVOLTAGESUPPRESSOR
3000 Watt Peak Power VOLTAGE - 5.0 to 220 Volts
Unit: inch ( mm )
P-600
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
(
)
)
.052 1.3
(
.048 1.2
• Glass passivated chip junction in P-600 package
• 3000W Peak Pulse Power capability at on 10/1000µs waveform
• Excellent clamping capability
• Low zener impedance
• Repetition rate(Duty Cycle):.05%
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed: 260°C/10 seconds/.375"
,(9.5mm) lead length/5lbs., (2.3kg) tension
(
)
)
.360 9.1
(
.340 8.6
MECHANICALDATA
Case: JEDEC P600 molded plastic
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color band denoted cathode except Bipolar
Mounting Position: Any
Weight: 0.07 ounce, 2.1 gram
DEVICESFORBIPOLARAPPLICATIONS
For Bidirectional use C or CA Suffix for types 3KP5.0 thru types 3KP220
Electrical characteristics apply in both directions.
MAXIMUMRATINGSANDCHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
VALUE
UNITS
Watts
SYMBOL
PPK
RATING
Minimum Max 3000
8.0
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1)
Steady State Power Dissipation at TL=75°CLead Lengths .375",(9.5mm)
(Note 2)
Watts
PD
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed
on Rated Load(JECED Method) (Note 3)
Amps
°C
IFSM
250
Operating and Storage Temperature Range
-55 to +175
TJ, TSTG
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2.
2.Mounted on Copper Leaf area of 0.79in2(20mm2).
3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
DATE : DEC.05.2002
PAGE . 1