QUARTZ
EURO
GPA64 PECL VCXO
11.4 x 9.6 x 4.7mm SMD
60.0MHz to 240.0MHz
Frequency range 60MHz to 240MHz
LVPECL Output
Supply Voltage 3.3 VDC
Phase jitter 0.2ps typical
Pull range from ±30ppm to ±150ppm
DESCRIPTION
OUTLINE & DIMENSIONS
GPA64 VCXOs are packaged in a 6 pad 11.4 x 9.6mm SMD package.
Typical phase jitter for GPA series VCXOs is 0.2 ps. Output is LVPECL.
Applications include phase lock loop, SONET/ATM, set-top boxes,
MPEG , audio/video modulation, video game consoles and HDTV.
SPECIFICATION
Frequency Range:
Supply Voltage:
Output Logic:
60.0MHz to 240.0MHz
3.3 VDC ±5%
LVPECL
RMS Period Jitter
60.0MHz ~ 120MHz:
120MHz ~ 240MHz:
Peak to Peak Jitter
2.5ps typical
4.7ps typical
60.0MHz ~ 120MHz:
120MHz ~ 240MHz:
17.5ps typical
24.5ps typical
Phase Jitter:
0.2ps typical
Initial Frequency Accuracy:
Output Voltage HIGH (1):
Output Voltage LOW (0):
Tune to the nominal frequency
with Vc= 1.65 ±0.2VDC
Vdd-1.025V minimum
Vdd-0.880V maximum
Vdd-1.810V minimum
Vdd-1.620V maximum
(RL=50 to Vdd-2V)
From ±30ppm to ±150ppm
1.65 ±0.35 Volts
Pulling Range:
Control Voltage Range:
Temperature Stability:
Output Load:
See table
50W into Vdd or Thevenin equiv.
0.5ns typ., 0.7ns max.
20% Vdd to 80% Vdd
50% ±5%
Rise/Fall Times:
Duty Cycle:
(Measured at Vdd-1.3V)
10ms maximum, 5ms typical
75mA maximum at 212.5MHz
80mA maximum at 622.08MHz
2kV maximum
-55° to +150°C
±2ppm per year maximum
See table
Start-up Time:
Current Consumption:
Static Discharge Protection:
Storage Temperature:
Ageing:
Enable/Disable:
RoHS Status:
Fully compliant or non-compliant
PART NUMBERING
Example: 3GPA64GB-80N-60.000
FREQUENCY STABILITY
Supply Voltage
3 = +3.3V
Series Designator
GPA64
RoHS Status
G = Compliant
Blank - Non-compliant
Stability over temperature range
(See table)
Temp. Range
Stability Code Stability ±ppm
A
B
C
D
E
25
50
100
25
50
0°~+70°C
0°~+70°C
0°~+70°C
-40°~+85°C
-40°~+85°C
-40°~+85°C
F
100
If non-standard frequency stability is required
Use ‘I’ followed by stability, i.e. I20 for ±20ppm
Pullability in ±ppm
Pullability determinator
N = minimum
ENABLE/DISABLE FUNCTION
Tristate Pad
Status
Output Status
M = maximum
T = Typical
Frequency in MHz
Not connected
Below 0.3Vdd
(Ref. to ground)
Above 0.7Vdd
(Ref. to ground)
LVPECL and Complimentary LVPECL enabled
Both outputs are disabled (high impedance)
Both outputs are enabled
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk