CORCOM Product Guide
Single Phase External Power Line Filter for Frequency Converters
FC Series
UL Recognized
FC10
FC Series
Specifications
Maximum leakage current,each line-to-ground
@ 120 VAC 60 Hz:
The FC filters provide filtering for frequency inverters and
variable speed motor drives. Designed for very noisy
applications, they attenuate conducted interference at low
and high frequency ranges and protect programmable
logic controllers from RF noise on the AC power line. These
filters perform best when installed on the line side of the
motor drive. The FC filters better prevent noise from
returning to the line, enabling equipment to meet strict
European regulations on RFI.
3.8 mA
6.7 mA
@ 250 VAC 50 Hz:
Hipot rating (one minute):
line-to-ground
2250 VDC
1450 VDC
50/60 Hz
line-to-line
Operating frequency:
Rated voltage (max.):
250 VAC
Suited for field wiring applications, these filters are ideal for
EMC troubleshooting and field refurbishing. The FC filters
feature side flanges for easy mounting and DIN type
terminals which eliminate live metal parts, allowing safer
and easier connection. The filters could also be sold as an
accessory to motor drives marketed into Europe.
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current
Rating
Frequency–MHz
.01 .03 .05 .1 .5
1
5
10 30
06A
12A
16A
25A
36A
9
5
4
2
0
19 26 37 65 65 50 40 35
17 25 37 65 65 65 60 35
15 22 36 65 65 70 70 35
14 22 36 75 75 70 70 48
Electrical Schematics
6
14 27 68 75 70 70 50
6 & 12 Amps
Line-to-line in 50 ohm circuit
Current
Rating
Frequency–MHz
.01 .03 .05 .1 .5
LINE
LOAD
1
5
10 30
06A
12A
16A
25A
36A
10 10 35 60 75 75 60 50 45
14 14 30 51 75 75 75 70 45
14 14 29 55 75 75 75 70 45
14 14 17 42 75 75 70 70 50
14 14 17 42 75 75 70 70 50
16, 25 & 36 Amps
LOAD
LINE
Resistor location for reference only.
58
Catalog 1654001
Revised 05-07
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Germany:
49-89-6089-0