Model 3600 is currently available,
although not recommended for new
designs. Model 3610 w/Model
Features
■ Bushing mount
■ Cost saving; pre-phased
■ Highly readable clockface readout
■ Easy mounting
CT-23 or CT-26 is preferred.
3600 - 10-Turn Precision Knobpot®
Electrical Characteristics1
0
5
9
1
Standard Resistance Range ...................................................................................100 to 100 K ohms
Total Resistance Tolerance ...........................................................................................................±± ꢀ
Effective Electrical Angle ...............................................................................................3600 ° nominal
Absolute Minimum Resistance.................................1 ohm or 0.1 ꢀ maximum (whichever is greater)
Noise.............................................................................................................100 ohms ENR maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
8
7
2
3
19.10
(3/4)
DIA.
6
4
8.73
(11/32)
Sea Level ..........................................................................................................1,000 VAC minimum
70,000 Feet..........................................................................................................400 VAC minimum
Power Rating (Voltage Limited By Power Dissipation or 38± VAC, Whichever is Less)
+2± °C ................................................................................................................................1.± watts
+8± °C......................................................................................................................................0 watt
Insulation Resistance (±00 VDC)..................................................................1,000 megohms minimum
Resolution ........................................................................................See recommended part numbers
Accuracy (Correlation of Dial Readout to Voltage Ratio Output) .........................±0.± ꢀ voltage ratio
Repeatability of Dial Readout ...............................................................................±0.1 ꢀ voltage ratio
NON-TURN PIN
EXTENDS
1.70 ± .13
25.40 ± .80
(1.00 ± .03)
(.067 ± .005)
19.10
(3/4)
DIA.
PILOT DIA.
10.26 ± .05
(.404 ± .002)
Environmental Characteristics1
3/8 "- 32 UNEF-2A THD
Operating Temperature Range.....................................................................................+1 °C to +8± °C
Storage Temperature Range.......................................................................................-6± °C to +8± °C
Temperature Coefficient Over Storage Temperature Range........................±±0 ppmꢁ°C maximumꢁunit
Vibration .........................................................................................................................................10 G
Wiper Bounce...........................................................................................0.1 millisecond maximum
Total Resistance Shift ..............................................................................................±2 ꢀ maximum
Voltage Ratio Shift ................................................................................................±0.2 ꢀ maximum
Shock .............................................................................................................................................±0 G
Wiper Bounce...........................................................................................0.1 millisecond maximum
Total Resistance Shift ..............................................................................................±2 ꢀ maximum
Voltage Ratio Shift ................................................................................................±0.2 ꢀ maximum
Load Life............................................................................................................1,000 hours, 1.± watts
Total Resistance Shift ..............................................................................................±2 ꢀ maximum
Rotational Life (No Load) ..............................................................................100,000 shaft revolutions
Total Resistance Shift ..............................................................................................±2 ꢀ maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
3.96
(.156)
PANEL THICKNESS
1.52
(.060)
MAX. -
MIN.
#21 AWG GOLD PLATED GRADE A
.724
DIA.
NICKEL SOLDER LUGS
(.0285)
LOCATED ON .05 RADIUS
3.18 ± .79
(1/8 ±1/32)
1.40 ± .38
(.055 ± .015)
I.D.
NON-TURN PIN
EXTENDS
1.70 ± .13
2
(.067 ± .005)
3
1
4.76 ± .79
(3/16 ± 1/32)
1.98 + .08/ - .03
(.078 +.003/-.001)
Total Resistance Shift ..............................................................................................±2 ꢀ maximum
IP Rating........................................................................................................................................IP 60
DIA.
Mechanical Characteristics1
Stop Strength.........................................................................................14 N-cm (20 oz.-in.) minimum
Mechanical Angle ......................................................................................................3600 ° +20 °, -0 °
Torque (Starting).........................................................0.21 to ±.6± N-cm (0.3 to 8.0 oz.-in.) maximum
Torque (Running)...............................................................................±.6± N-cm (8.0 oz.-in.) maximum
Variation........................................................................................0.71 N-cm (1.0 oz.-in.) maximum
Mounting.............................................................................170-200 N-cm (1±-18 lb.-in.) maximum
Backlash........................................................................................................................1.0 ° maximum
Weight..................................................................................................................Approximately 17 gm
Terminals..............................................................................................................Gold-plated J-Hooks
Soldering Condition....................Recommended hand soldering using Sn9±ꢁAg± no clean solder,
0.02±” wire diameter. Maximum temperature 399 °C (7±0 °F) for 3 seconds.
7.11
(.280)
10.41 ± .08
(.410 ± .003)
PANEL HOLE PATTERN
TOLERANCES: EXCEPT WHERE NOTED
.25
(.010),
.13
(.005)
DECIMALS: .XX ±
.XXX ±
FRACTIONS: ±1/64
MM
DIMENSIONS:
(IN.)
No wash process to be used with no clean flux.
Markings ..............................Manufacturer’s name and part number, resistance value and tolerance,
linearity tolerance, wiring diagram, and date code.
1At room ambient: +25 °C nominal and humidity nominal, except as noted.
WIPER
2
CW
CCW
3
1
Recommended Part Numbers
CLOCKWISE
Resistance Resolution
Part Number
(Ω)
(%)
3600S-1-102
3600S-1-502
3600S-1-103
1,000
5,000
10,000
.035
.027
.022
BOLDFACE LISTINGS ARE IN STOCK AND READILY
AVAILABLE THROUGH DISTRIBUTION.
FOR OTHER OPTIONS CONSULT FACTORY.
REV. 07/06
“Knobpot” is a registered trademark of Bourns, Inc.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
5秒后页面跳转
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
替代型号
如果您发现信息不准确，
