Technical Data, 37-way*
Cannon APD / DIN 72585 Connectors
APD 37-way is a highly reliable, cost effective multi-pin connector with
signal contacts (multi-layout power / signal on demand). It offers wire to
wire and wire to board connection solutions. According to DIN 72585,
the connector is dedicated for harsh environmental usage. Various
customer specific designs (e.g. different coding) are possible.
Electrical Data
Voltage
48 VDC max.
Current Carrying Capacity:
max. 12 A at 85°C / 105 °C short time, for wire size
1,5 mmΩ (for a limited no. of contacts)
max. 2 A at 120°C or 5 A, for wire size 1,5 mmΩ
(for a limited no. of contacts)
Initially: max. 5 mΩ
Contact Resistance
After climatic tests: max 10 MΩ
1.000 VAC
Test Voltage
Insulation Resistance
> 1.000 MΩ
Mechanical Data
Sealing acc. to IEC 60529 and DIN 40050
IP 67: 0,1 bar / 30 minutes
IP 69K. Jet water 85°C
Operating Temperature Range
-40°C / 125°C
Shock
Vibration
50g / 11ms half sine IEC 60512
Sine wave 70-2.000 Hz, 18/20g
100 hours / axis, 50% of test time at
120°C (test conditions) DIN 72585
20 Mating cycles
Durability
Coupling Torque
close: max 4 Nm
open: min 1 Nm; max 4 Nm
min 80 N
Contact Retention Force
Mechanical Robustness
Static, lateral load: 150N / 10s
Dynamic impact, ball drop 2 Joules,
Cable drop 1m height EN ISO 8092
23°C/ 83% - 40°C/ 95%; 168h
Condensed water / SO2; 3 cycles
Humidity, cyclic:
Industrial Atmosphere
Materials
Connector housing
O-Ring
PA66
FKM
Contacts
Coupling nut
Copper alloy, tinned, gold-plated
PA
Standards and Specifications (in accordance with DIN 72585) Environmental
Resistance against Fluids:
Diesel DIN EN 590
Diesel + test fuel FAM2
Motor oil SAE30
Motor oil DIN 51 5111
Gearbox oil, different types e.g. SAE 80W90
Brake Fluid DIN ISO 4925
Cleaning agent
Salt Spray Test:
48h DIN 50021
* Contact layout is not specified by DIN 72585
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
17